Temperature Distribution Analysis

Sort condition
Newest first
Oldest first
Large number of views
  1. Verification of Temperature Distribution and Thermal Strain Level with Induction Heating for Thin Plates

    Hidemasa Wakabayashi, Y-tec Corporation

  2. [JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)

    This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…

  3. [JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation

    In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.

  4. Induction Heating Analysis Using Current Control

    Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.

  5. Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening

    Yohei Awata, Denki Kogyo Co.,Ltd.

  6. A Temperature Prediction Technique of Motors by the Combination Between Harmonic Loss Simulation by JMAG-Designer and Thermal Simulation by FloTHERM.

    Manabu Kawaji, Aisin Seiki Co., Ltd.

  7. Introduction to Motor Thermal Analysis in Motor-CAD

    Soumya Dutta, Romax Technology Japan Limited

  8. Oil cooling Electric machine using multi-time scale CHT and Hybrid Multiphase

    Makoto Sato, Siemens PLM software Computational Dynamics K.K.

  9. [JAC250] Dielectric Heating Analysis of a High-Frequency Preheater with Roller Electrodes

    In this example, a use case is presented where the influence of the pitch of roller electrodes on the temperature distribution of a material (tablets) is evaluated.

  10. [JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear

    In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.

  11. [JAC249] Dielectric Heating Analysis of a High-Frequency Preheater with Parallel Plate Electrodes

    In this example, a use case evaluating the influence on the temperature distribution of materials (tablets) with and without auxiliary electrodes is presented.

  12. [L-MU-92] JMAG/Particleworks Coupled Motor Cooling Analysis

    Motor temperature control is an important issue. Due to temperature rise, demagnetization occurs in PM motor magnets leading to a loss of high efficiency.

  13. [JAC206] Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis

    This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…

  14. [JAC198] Bus Bar Thermal Stress Analysis

    Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.

  15. [JAC186] Gear Induction Hardening Analysis Using Two Frequencies

    In this material, the validity of coil geometry used for quenching is evaluated by heating the gear top and bottom at high and low frequencies, respectively, to confirm uniform te…

  16. [JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…

Search Filter

  • All Categories

Remember me
Sign In
Create an account (Free) About authentication ID for JMAG website