FQ
Time Harmonic Magnetic (2D/3D)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Verification of Temperature Distribution and Thermal Strain Level with Induction Heating for Thin Plates
Hidemasa Wakabayashi, Y-tec Corporation
-
[JAC254] Vibration Analysis of a Large Oil-Filled Transformer
In this example, evaluating vibration caused by electromagnetic excitation in a large transformer. Since large transformers are oil-cooled, in this example the oil, which is the f…
-
[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)
This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…
-
[JFT081] Creating an Induction Motor Efficiency Map Using JMAG-Designer (Speed Priority Mode)
In this document, how to create an efficiency map of an induction motor using an efficiency map study (speed priority mode) in JMAG-Designer is presented.
-
[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation
In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.
-
Analysis of Winding Losses of Shunt Reactor using “Zooming Analysis”
Yasuhisa Ito, MEIDENSHA CORPORATION
-
Development of a Simulation Method for Electromagnetic Stirring in Levitation Melting Furnace Using a JMAG-STAR-CCM+ Two-Way Coupled Analysis
Asako Kamimoto, Daido Steel Co., Ltd. / Shinsuke Inoue, Star Info Tech Co.,Ltd.
-
Induction Heating Analysis Using Current Control
Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.
-
Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening
Yohei Awata, Denki Kogyo Co.,Ltd.
-
Optimum Design of Wireless Power Transfer Coils for EVs Calculated by JMAG
Toshiyuki Fujita, Technova Inc.
-
Effects of the Aluminum Coil on the WPT System
Atsushi Ogasahara, Tabuchi Electric co., ltd.
-
[JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear
In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.
-
[JAC221] Confirmation of the Influence from the Reduction of High-Frequency Resistance of a Magnetically Plated Wire Choke Coil
In this example, high frequency resistance values are obtained from choke coil copper loss analysis results using JMAG’s layer coating mesh function, and the effectiveness of redu…
-
[JAC202] Core Stray Loss Analysis of Power Transformer
This document introduces runs analysis by modeling the short-circuit test that is conducted when evaluating stray loss and obtains stray loss distribution in the core close to the…
-
[JAC232] Reactor Joule Loss Analysis
In this example, investigating Joule loss with respect to the positions of air gaps in a reactor is presented.
-
[JAC206] Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis
This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…
