Circuit / Control
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-043] SRM_01 3-phase
Type: SRM | Max Power: 0.5(kW) | Stator(Outside Diameter): 160(mm) | Height: 75(mm) | Voltage: DC150(V) | Rotor/Mover: RM
-
Togami Electric Mfg. Co., Ltd.
Building on tradition, the Togami Electric Mfg. Co., Ltd., a manufacturer of power distribution and control equipment, makes use of their creativity and ingenuity to evolve with s…
-
[JAC217] Creating Efficiency Maps for 3-Phase Induction Motors
In this example, the use of JMAG-RT Viewer to create efficiency maps for three-phase induction motors when drive temperatures change.
-
[JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motor
In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…
-
Next Generation EV Motor Design Using JMAG-Designer
Bernd Cebulski, IAV GmbH
-
Vibration Prediction of Permanent Magnet Synchronous Motors by Aid of JMAG
Toru Mizota, YANMAR HOLDINGS CO., LTD.
-
Motor Drive Verification Using HILS Implemented with JMAG-RT Models
Masamichi Inoue, Mitsubishi Electric Corporation
-
Model Based Development of Dual Inverter with JMAG-RT Model and Motor HILS
Takahiro Yamada, MIRISE Technologies Corporation
-
[W-MB-156] Improving Motor Plant Model Accuracy by Accounting for Harmonic Iron Loss
Because of the acceleration of the motor and the effect of the PWM drive, it is becoming more important to account for loss in order to improve accuracy even for analysis using mo…
-
[W-MB-153] Accuracy and Speed Verification of Motor Plant Models Accounting for Spatial Harmonics
This document uses JMAG-RT, which is a type of plant model, to show the relationship between the resolution and accuracy of each axis (mechanical angle, current amplitude, and cur…
-
[W-MB-152] Accuracy of Motor Plant Model Required for ECU testing
ECU testing is performed under various conditions from the normal to the abnormal system.
-
[W-MB-155] Accuracy of 6-Phase Motor Plant Models for Detecting Faults at Disconnections
Multiphase motors have become widely used, and a fail-safe function can be realized by providing a system with redundancy.
-
[W-MB-151] Accuracy of Motor Plant Model Required for Control Calibration
Control calibration is time-consuming work because it is carried out for every operating point using the actual machine.
-
[W-MB-157] Evaluation of the Effect of Resolver Eccentricity on PM Motor Torque Ripple Control
VR-type resolvers are widely used as angle sensors to control the rotation of traction motors for electric vehicles and hybrid vehicles.
-
[W-MB-167] Motor Plant Model Considering AC Loss for Control Calibration
Control parameter calibrations on Model-In-the-Loop Simulation (MILS) with Finite Element Analysis (FEA) based motor models is expected to be a standard procedure in the Model-Bas…
-
[W-MO-114] Comparison of Efficiency Map with Measurement
This document compares an efficiency map obtained with simulations with an efficiency map consisting of actual measurements, achieving an error of 1% or less for entire regions.
