JMAG-Designer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC106] Iron Loss Analysis of a Brush Motor
This note presents how to obtain the iron loss in the stator core and rotor core of a brush motor.
-
[JAC159] Sensitivity Analysis of Dimensional Tolerance in an SPM Motor
This Application Note presents how to assume a dimensional tolerance of ±0.4 mm for a chamfer, and find out whether changing dimensions within the tolerance range has an effect on…
-
[JAC110] Loss Analysis of a Choke Coil
This Application Note shows how to obtain the iron loss and copper loss in a choke coil.
-
[JAC099] Superimposed Direct Current Characteristics Analysis of a High Current Reactor
This Application Note presents how to obtain a high-current reactor’s superimposed direct current characteristics when the gap length is varied.
-
[JAC083] Magnetic Shielding Analysis of an Induction Furnace
This Application Note displays magnetic flux density distribution to evaluate the differences in magnetic flux with and without yokes.
-
[JAC129] Analysis of a PM Stepper Motor Accounting for Magnetization
In this analysis, a magnetization device model is created and a magnet is magnetized. The magnetization distribution and surface magnetic flux density of the magnetized magnet, an…
-
[JAC062] Attractive Force Analysis of a Solenoid Valve
This Application Note obtains the attraction force at each position of the movable core.
-
[JAC058] Efficiency Analysis of an IPM Motor
This Application Note presents the use of magnetic field analysis to obtain the efficiency of an IPM motor in each current phase with a rotation speed of 1800 rpm and the current …
-
[JAC054] Analysis of the Cogging Force of a Moving Coil Linear Motor
This Analysis Note explains how to obtain the magnetic flux density distribution and cogging in a moving coil linear motor with skew applied to its magnets.
-
[JAC056] Torque Characteristics Analysis of a Self Starting Type Permanent Magnet Motor
This Application Note shows how to obtain the current density distribution and slip versus torque curve.
-
[JAC055] Integrated Magnetization Analysis of an IPM Motor
This Application Note explains how to determine the changes that occur in a magnetizing field if the making current is changed during magnetization, as well as how to obtain the i…
-
[JAC068] Speed Versus Torque Characteristic Analysis of a Three-Phase Induction Motor
This Application Note explains an analysis that confirms the Speed-Torque curve and current density distribution of an induction motor.
-
[JAC070] Analysis of Impedance-Frequency Characteristics of a Cable
This Application Note explains how to obtain the frequency characteristics of the resistance and inductance in twisted pair cables.
-
[JAC061] Current Distribution Analysis of a Choke Coil
This Application Note explains a case example that obtains the current distribution in a choke coil.
-
[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN –Direct Link-
In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.
-
[JAC066] Operating Time Analysis of an Injector
This Application Note explains how to apply direct current voltage to a solenoid injector and obtain its response characteristics by accounting for effects from eddy currents.
