JMAG-Designer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC082] Analysis of a Synchronous Reluctance Motor
This Application Note presents an evaluation of torque variations that occur when the phase of a sinusoidal wave current is changed.
-
[JAC121] Output Analysis of a Salient-Pole Synchronous Generator
This Application Note presents the use of a magnetic field analysis to obtain the magnetic flux density distribution, no-load saturation curve, and output of a salient-pole synchr…
-
[JAC130] Thermal Conductivity Analysis of Basic Geometry
In this Application Note, the analysis accuracy is investigated by comparing the temperatures obtained through analysis in each part with theoretical values.
-
[JAC112] Starting Thrust Force Analysis of a Linear Induction Motor
This Application Note presents how to obtain the starting thrust force for a linear inductance motor.
-
[JAC127] Resistance Heating Analysis of Steel
This Application Note presents how to obtain the temperature distribution, temperature variations, and heat flux distribution in a body heated by ohmic heating.
-
[JAC146] Analysis of Stray Loss in a Transformer
This Application Note explains how to obtain losses in a transformer tank and use them to evaluate the temperature distribution in each part.
-
[JAC081] AL-value Analysis of a Choke Coil
This Application Note explains a case example that obtains the air gap versus AL characteristics of a choke coil.
-
[JAC119] Torque Characteristic Analysis of a Three Phase Wound Rotor Induction Motor
This Application Note shows how to obtain the current density distribution and slip-torque curve.
-
[JAC152] Electromagnetic Force Analysis of Short-circuited Power Transformer Coils
This analysis uses different coil positions to evaluate the Lorentz force density and electromagnetic force produced in the coils during a short circuit in order to confirm the ef…
-
[JAC158] Superimposed Direct Current Characteristic Analysis of a Reactor That Accounts for Minor Hysteresis Loops
This Application Note presents the use of the frozen permeability condition to obtain the superimposed direct current characteristic that includes minor hysteresis loops of a high…
-
[JAC080] Cogging Torque Analysis of an SPM Motor with Skewed Magnetization
This Application Note presents the use of a magnetic field analysis to obtain the flux density distribution, cogging torque, and induced voltage of an SPM motor that has skewed ma…
-
[JAC085] High-Frequency Induction Heating Analysis of a Constant Velocity Joint
This Application Note shows how to run an analysis of the elevated temperature process by using the geometry of a coil to evaluate whether or not the target temperature conditions…
-
[JAC078] Loss Analysis of a Sheet Coil Transformer
This Application Note shows how to obtain the iron loss of a sheet coil transformer.
-
[JAC123] Thermal Analysis of a Choke Coil
This Application Note shows the use of a thermal analysis to obtain the temperature distribution using the iron losses and copper losses in the choke coil as the heat source.
-
[JAC087] Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting
This document will compare the results of iron loss accounting for only the size of stress, and iron loss accounting for changes in magnetic flux density over time for each princi…
-
[JAC132] Loss Analysis of a Three-phase Transformer
This note presents how to obtain the iron and copper losses of a three-phase transformer.
