Material Modeling / Loss Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Development of Analysis and Design Technologies for Motors in Technology Research Association of Magnetic Materials for High-Efficiency Motors (MagHEM).
Yoshinari Asano, DAIKIN INDUSTRIES, LTD.
-
[JAC200] Iron Loss Analysis of IPM Motor using Hysteresis Model
In this example, a hysteresis model accounting for minor loops of the direct current bias magnetism and the lamination analysis function accounting for eddy current distribution i…
-
[JFT104] Application of an Anomalous Eddy Current Loss Factor Dependent on Magnetic Flux Density and Frequency
In this document, an anomalous eddy current loss factor table is created in which an anomalous eddy current loss correction factor is dependent on frequency and magnetic flux dens…
-
[L-MU-110] Reaching Steady-State at an Early Stage Using a Control Circuit Containing a JMAG-RT Model
Many motor performance evaluations are performed at steady-state. If transients occur during control/circuit coupling, it is necessary to calculate the number of electrical angle …
-
[W-MA-111] Improvements in Accuracy of Anomalous Eddy Current Loss Calculations (2)
The iron loss analysis method the most commonly applied uses measured iron loss data (hereinafter referred to as the conventional method). In the conventional method, since the ap…
-
[W-TR-15] Loss Evaluation of a Transformer Shield Based on the Homogenization Method
In this paper, each electromagnetic steel sheet of the shield is not modeled; by applying the homogenization method which replaces magnetically and electrically equivalent materia…
-
[W-MA-47] Toward Practical Application of Iron Loss Analysis Taking Stress into Account
Increasing the accuracy of an iron loss analysis for a magnetic field analysis poses challenges. With conventional iron loss calculation methods, the iron loss characteristics of …
-
[W-MA-50] Effectiveness and Limits of 2D Analysis from Loss Analysis
In electromagnetic field analysis, 2D analysis (FEM) that include iron loss evaluations are widely used as a way to find a balance between finely detailed analysis and convenient …
-
Analysis of Winding Losses of Shunt Reactor using “Zooming Analysis”
Yasuhisa Ito, MEIDENSHA CORPORATION
-
Magnetic Field Analysis of Permanent Magnet Synchronous Motor Using JMAG-Designer Ver.17.1 with Control Circuit Modeling Functions
Tatsuo Nishimura, Mitsubishi Electric Corporation
-
Design of IPM Machines with Hairpin Windings for Electric Vehicle Applications
Bernd Cebulski, IAV GmbH Chemnitz
-
Application of Hysteresis Model to Improve Accuracy of Iron Loss Estimation for Rotating Machine
Takuya Yoshioka, DENSO CORPORATION
-
Modeling and Reduction Techniques for Bundle- and Strand- level Proximity Losses in High-Speed AC Machines
Patel Bhageerath Reddy, SFMotors Inc.
-
Effects of the Aluminum Coil on the WPT System
Atsushi Ogasahara, Tabuchi Electric co., ltd.
-
[JAC201] Iron Loss Analysis of an SR Motor
This example, to accurately capture iron loss that occurs in the SR motor, we will introduce hysteresis loss accounting for the hysteresis loop of the materials and the iron loss …
-
[W-MA-87] Verification of the Accuracy of Minor Loop Loss Using a Play Model
In this paper, from the minor loop loss with DC superposition being measured and compared with results using the play model, it was verified that the play model can reproduce the …
