MBD

Sort condition
Newest first
Oldest first
Views
  1. 239 – Fault Analysis in an IPM Motor

    In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…

  2. 245 – Injector Control and Eddy Current Effects

    In this example, an example of evaluating the difference in responsiveness of an injector when eddy currents are taken into account or not is presented.

  3. 231 – Vector Control Simulation of a Synchronous Reluctance Motor

    In this example, circuit simulation is carried out simulating the control of current and speed by loading a JMAG-RT model for a SynRM into a control/circuit simulator. In addition…

  4. 230 – 6-Phase SPM Motor Inverter Fault Simulation

    In this example, a JMAG-RT model of a 6-phase SPM is loaded into a control/circuit simulator, and circuit simulation for an inverter failure is carried out.

  5. 227 – Circuit Control Simulation for Three-Phase Induction Motor

    In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.

  6. 216 – Simulation of a Claw-Pole Type Alternator Using Control Simulator and JMAG-RT

    In this example, the output voltage and field current of a claw-pole type alternator is checked when the rotor speed is changed.

  7. 213 – Circuit/Control Simulation of a Wound-Field Synchronous Motor

    In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…

  8. 206 – Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis

    This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…

  9. 166 – Line Start Simulation of an Induction Machine Using a Control Simulator and the JMAG-RT

    This Application Note explains how to use the JMAG-RT to create a JMAG-RT model of an induction motor, import it to a circuit/control simulator, and run an induction motor line st…

  10. Improvements of JMAG-RT Model of Induction Motors in Automotive Traction Drive

    Akira Chiba, Tokyo Institute of Technology

  11. The Role of JMAG on Powertrain Development

    Albert Li, Gogoro Inc.

  12. Utilization of JMAG-RT Using Multi-Case Parallel Calculation

    Tomoya Ueda, NIDEC CORPORATION

  13. Model-Based Design Meets FEA Simulation – Improving Motor Control Development using High Fidelity Motor Models

    Tony Lennon, The MathWorks, Inc.

  14. Development of JMAG for Model Based Design

    Hiroyuki Sano, JSOL Corp.

  15. Simulating a motor hardware using an HIL system

    Ken Sieber, National Instruments Japan

  16. Model-Base Virtual Verification Method With Advanced PCB Simulation Technics

    Masanari Ueda, Mentor Graphics Japan Co., Ltd.

Search Filter

  • All Categories