MBD
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JFT015] Procedure for Direct Coupled Analysis with JMAG and STAR-CCM+ Taking Thermal Fluid into Account (Ver.22.0 and After)
This document presents the procedure for two way coupled analysis considering thermal fluid by using JMAG and STAR-CCM+.
-
[JAC292] Evaluating Energy Consumption During Drive Cycle Using Loss Maps with Temperature Dependency for IPM Motors
In this example, loss maps with temperature dependency for an IPM motor are used to compare and evaluate the energy consumption and efficiency during a WLTC drive cycle while usin…
-
SIMBA, Reinventing Motor Drive Simulation
Ryoko Imamura, Powersys
-
Model-Based Calibration Enables Optimal Torque Control of Synchronous Motors in a Short Time
Atsushi Katagiri, MathWorks Japan
-
Applied Cases of EV Motor Controller Tuning by MILS using JMAG-RT
Nobuo Morimura, SUBARU CORPORATION
-
Enabling Full EDU Optimization and Losses Analysis Under Different PWM Strategies and DC Voltages Employing Combined JMAG-MATLAB Simulation Environments
Nicola Rossi, Rimac Technology
-
[W-MB-181] Validation of JMAG-RT Spatial Harmonic Model Accuracy: Comparison of Differential Equation Models, Integral Method Models, and FEA
JMAG-RT generates models that can simulate nonlinear motor characteristics for use in control circuit designs done with software-in-the-loop (SIL), hardware-in-the-loop (HIL), and…
-
[JAC295] Inverter Changeover Control for an Open-end Winding Motor
This case study runs a circuit simulation of an open-end winding motor drive system that switches from using a single inverter to dual inverters during operation in order to mitig…
-
[L-MB-31] Monitoring Internal Condition of the Motor Using JMAG-RT Model
Quietness and safety are required from a motor as equipment such as electric vehicles and robots that utilize motors have been in great demand. For this reason, motor control is r…
-
[JAC299] Inverter Changeover Control for an Open-end Winding Motor (Wound-Field Synchronous Motor)
This case study runs a circuit simulation of an open-end winding motor drive system that switches from using a single inverter to dual inverters during operation in order to mitig…
-
Smart Motor Control Technology Evolving with AI – Virtual Sensors and Fault Detection –
Atsushi Katagiri, MathWorks Japan
-
JMAG Thermal Analyses for Higher Efficiency in Cooling System Design During Motor Product Development
Manabu Kawaji, AISIN CORPORATION
-
Case Study of Data-driven Design in Electric Motor Development
Naoki Ohmura, IHI Corporation
-
[L-VI-183] Evaluation of System-Level Vibration Caused by Motor Electromagnetic Forces and Torques
Motors are the power source that is incorporated into a system like eAxle, and the torque and electromagnetic force (excitation force) generated by the motor is transferred throug…
-
[L-MB-186] System Integration and Verification Using High Accuracy Plant Models
In this case study, the detection of current anomalies was verified by simulating an open winding fault.
-
[RTML-001] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 51(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)