Generator
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[L-MO-54] JMAG-Express Online
JMAG-Express Online is a Web service to support your motor design work anytime, anywhere.
-
[JAC251] Alternator Vibration Analysis
In this example, the electromagnetic force generated in the stator core of a claw pole alternator is obtained, and acceleration is evaluated with an electromagnetic force - struct…
-
[JAC253] Analysis of an Induction Generator
In this example, the relationship between the output power and efficiency of the induction generator is shown here.
-
[JAC216] Simulation of a Claw-Pole Type Alternator Using a Control Simulator and JMAG-RT
In this example, the output voltage and field current of a claw-pole type alternator is checked when the rotor speed is changed.
-
[RTML-046] ALTERNATOR_01
Type: ALTERNATOR | Stator(Outside Diameter): 140(mm) | Height: 45(mm) | Voltage: DC200(V) | Rotor/Mover: WF
-
[L-MO-09] Easily Creating Complex Coil Ends Geometry in a Template
The introduction of square wire coils and higher motor speeds no longer allow coil AC losses to be ignored as a loss factor. Coil AC losses are caused by the skin effect and prox…
-
[W-SE-95] Improvement in Generation of Three-Dimensional Skin Mesh
We have improved the reliability of skin mesh generation for JMAG-Designer in this work, and thus, its details are introduced in this paper.
-
[W-SE-99] High Speed Magnetic Field Analysis with SMP Solver
The parallel solver is one way to run magnetic field analysis at high speed. JMAG has an SMP-parallel solver that can easily be used with a single click on the computer.
-
[W-MO-17] Alternator Analysis Using Tetrahedral/Pentahedral Mixed Mesh
This paper looks at tetrahedral/pentahedral mixed mesh and aims to generate effective mesh to reduce calculation time. We compared calculation times and accuracy when analysis is …
-
[L-MO-89]JMAG-Express Motor Design Tool
JMAG-Express is a motor design tool that instantly calculates unique motor characteristics in order to output design specifications to meet design requirements. As it uses the fin…
-
[L-MO-90] Detailed Coil Modelling for Motors
Motors require higher power densities and lowered heights. This calls for high-fidelity simulations that make it possible to view the effects of the detailed geometry of a coil. I…
-
[JAC212] AC Loss Analysis of a Claw Pole Alternator
In this example, we introduce the case study that evaluates AC losses in coils of claw pole alternator.
-
[JAC121] Output Analysis of a Salient-Pole Synchronous Generator
This Application Note presents the use of a magnetic field analysis to obtain the magnetic flux density distribution, no-load saturation curve, and output of a salient-pole synchr…
-
Loss Distribution Analysis for 4-pole air Cooled Turbine Generator Using 3D Finite Element Method
Hiromu Kamiyama, TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION
-
Simulation based design validation and optimisation of Electrical machines for automotive applications
M.P.Ragavendra, Lucas-TVS Ltd.,
-
Analysis of a Claw Pole Rotating Machine Regeneration
Taiga Komatsu, Electromechanical Systems Department, Advanced Technology R&D Center, Mitsubishi Electric Corporation
