Induction Heating
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Development and Experimental Verification of Simulation Code on Induction Heat Treatment Process
Ju,Dong-Ying, Institute for Advanced Sciences, Saitama Institute of Technology
-
Introduction and Application of JMAG on Induction Heating
Tomohiro Adachi, DAI-ICHI KIDEN CO., LTD.
-
Shape Optimization of Induction Heating Coil by JMAG – Optimus Cooperation
Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.
-
Design Exploration of Heating Coil Shape by Cooperation of JMAG and HEEDS
Hiroshi Yuki, NTN corporation
-
Investigations in Coil Design for Induction Heating Using JMAG and the Optimization Tool HEEDS
Toshiaki Matsumura, AW ENGINEERING CO.,LTD.
-
[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…
-
[JAC183] Agitation Force Analysis of an Induction Furnace
This analysis will evaluate the size of Lorentz force required to agitate and where this is generated.
-
[JAC186] Gear Induction Hardening Analysis Using Two Frequencies
In this material, the validity of coil geometry used for quenching is evaluated by heating the gear top and bottom at high and low frequencies, respectively, to confirm uniform te…
-
[JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear
In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.
-
Induction Heating Analysis Using Current Control
Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.
-
Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening
Yohei Awata, Denki Kogyo Co.,Ltd.
-
[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation
In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.
-
[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)
This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…
-
Verification of Temperature Distribution and Thermal Strain Level with Induction Heating for Thin Plates
Hidemasa Wakabayashi, Y-tec Corporation
-
Computer Simulation of Double Hardened Layer Induction Hardening
Takashi Horino, NETUREN CO., LTD.
-
[W-SE-145] Highly Parallel Solver Performance Evaluation (Induction Heating)
This document uses as an example an induction heating model to evaluate the performance of the highly parallel solver. As a result, it was found that even in thermal-magnetic fiel…
