Linear Solenoid / Linear Actuator
- Sort condition
- Newest first
- Oldest first
- Views
-
[RTML-039] SOLENOID_01
Type: SOLENOID | Voltage/Current: DC12(V)
-
Application of SIMP-based Topology Optimization in JMAG
Sukhwa Jung, DENSO CORPORATION
-
Challenges Moving from Static to Dynamic Analyses: The Merits of Introducing Transient Response Analysis
Toshihisa Akutsu, San-Eisha, Ltd.
-
The Influence of Material Hysteresis in Electromagnetic Pump Operation Analysis
Kiyoto Matsumoto, IWAKI CO., LTD.
-
252 – Geometry Optimization of a Solenoid Valve
In this example, an example where the geometry of a solenoid valve is optimized using a multi-objective optimization algorithm is presented.
-
Optimization of Solenoid Attraction using JMAG Optimization Function
Shotaro Hatanaka, CKD Corporation
-
Development of Control Circuit Model for Multi Injection Solenoid Valve Motion Prediction
Yukihiro Yoshinari, Hitachi Automotive Systems, Ltd.
-
192 – Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization
Here, we will discuss the steps to investigate the effect on responsiveness caused by residual magnetization generated in the magnetic materials, and look at case examples.
-
242 – Solenoid Valve Attractive Force Analysis Taking into Account Movable Part Motion
In this example, an example is presented where the influence on the electromagnetic force by the presence or absence of inclination is confirmed at each position of the movable pa…
-
[L-MB-32] Simulating Responsiveness of Electric Machinery During Control with High Accuracy Using a Direct Coupling Analysis
For machines requiring high-speed responsiveness for controllers such as solenoid valves and injectors, level of accuracy required in simulation have increased following the advan…
-
245 – Injector Control and Eddy Current Effects
In this example, an example of evaluating the difference in responsiveness of an injector when eddy currents are taken into account or not is presented.
-
189 – Response Characteristics Analysis of Injectors Accounting for Collision
For this case, direct current voltage is applied to the solenoid type injector and the response characteristics is obtained after accounting for the effect of the collision and ed…
-
Predicting Electromagnetic Pump Operation Using a Simulink-JMAG Coupled Analysis
Kiyoto Matsumoto, IWAKI CO., LTD.
-
Prediction of Solenoid Valve Motion by Magnetic Field – Fluid Two-Way Coupled Analysis
Yukihiro Yoshinari, Hitachi Automotive Systems, Ltd.
-
Cooperation analysis of optimization and quality engineering by modeFRONTIER and JMAG
Manabu Kawaji, AISIN SEIKI Co.,Ltd.
-
Optimization calculation of JMAG and its application in proportional solenoid valve
Zhou Wangjing, Wuxi Fuel Injection Equipment Research Institute, FAW, China
