Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Development of a Detailed 3D Eccentric eMotor Model for Electric Vehicle NVH Simulations
Jacob Krizan, Ford Motor Company
-
Investigation of the Effect on Electromagnetic Excitation Force Considering Dynamic Eccentricity in Ultra-High Rotation Motor
Takashi Maeda, ESTECH Corporation
-
H3X Integrated Motor Drives: Delivering World-Class Power Density for Maximum Vehicle Range
Max Liben, H3X Technologies
-
Coupled Optimization of Active and Passive Components in Electric Machines: Towards Performance, Efficiency, Reliability and EMC Objectives
Mohamed Essam Ahmed, AVL List GmbH
-
Practical Robust Optimization Method using HPC
Takuya Yoshioka, DENSO CORPORATION
-
Investigation of Error Factors between Measurement and Analysis Results of Torque in a Permanent Magnet Synchronous Motor under High Speed Rotation
Masatsugu Takemoto, Okayama University
-
Model-Based Calibration Enables Optimal Torque Control of Synchronous Motors in a Short Time
Atsushi Katagiri, MathWorks Japan
-
1 : JMAG-Ansys-Optimus Electromagnetic Field-Structure Analysis 2 : AI and PIDO Integration -Fast non-parametric shape optimisation-
Mio Hashiba, CYBERNET SYSTEMS CO., LTD.
-
[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets
In this example, analysis is performed while varying the temperature of magnetized magnets, and then the influence on the torque waveform and magnetic flux density distribution is…
-
[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-
This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.
-
[JAC034] Demagnetization Analysis of an SPM Motor
This note presents the use of a magnetic field analysis to evaluate the demagnetizing ratio distribution of an of an SPM motor by changing the current flow.
-
[JAC292] Evaluating Energy Consumption During Drive Cycle Using Loss Maps with Temperature Dependency for IPM Motors
In this example, loss maps with temperature dependency for an IPM motor are used to compare and evaluate the energy consumption and efficiency during a WLTC drive cycle while usin…
-
[JAC286] IPM Motor Iron Loss Analysis Accounting for PWM -Evaluation with Different Modulation Methods-
In this example, the effects on iron loss when the modulation method for PWM control is changed are evaluated.
-
Sinfonia Technology Co., Ltd.
As an electrical machine manufacturer, Sinfonia Technology boasts a diverse product lineup that leverages its technological development capabilities centered on rotation machines …
-
[JAC279] Thermal Analysis Accounting for Cooling of the IPM Motor
In this example, thermal equivalent circuit is used to run thermal analysis of a 3-phase IPM motor that accounts for cooling, and check the temperature change in the coil.
-
[JAC018] Thermal Analysis of a Motor
In this example, how to evaluate a motor's temperature distribution by creating a thermal analysis model that can investigate the loss analysis and temperature distribution in ord…
