IPM Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC046] Sensitivity Analysis of the Magnetization Pattern of an SPM Motor
This Application Note presents the use of a magnetic field analysis to obtain the surface flux density for radial pattern, parallel anisotropic pattern, and polar anisotropy patte…
-
[JAC120] Thermal Demagnetization Analysis of an SPM Motor
This Application Note presents how to change the temperature of permanent magnets in an analysis, and then evaluate the effects on the torque waveform, magnetic flux density distr…
-
[JAC074] Speed Versus Torque Analysis of a Single-Phase Induction Motor
This Application Note explains how to obtain the current density distribution and Speed-Torque curve created by auxiliary winding that uses a capacitor.
-
[JAC091] Iron Loss Analysis of an IPM Motor Including the Effects of Press Fitting Stress
This Application Note presents modeling the press fitting of a core and frame with the Press Fit condition and then obtaining the iron loss density of an IPM motor with and withou…
-
[JAC087] Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting
This document will compare the results of iron loss accounting for only the size of stress, and iron loss accounting for changes in magnetic flux density over time for each princi…
-
[JAC108] Centrifugal Force Rupture Analysis of a Ring Magnet
This Application Note presents how to obtain the stress distribution of a ring magnet in an SPM motor rotating at high speeds.
-
[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN –Direct Link-
In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.
-
[JAC069] Iron Loss Analysis of an IPM Motor
This Application Note explains a case example that obtains the iron loss and its distribution in a permanent magnet motor.
-
[JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor
This Application Note demonstrates a case study where the effects of a carrier harmonic against an IPM motor’s iron loss is confirmed using estimated harmonic current waveform as …
-
[JAC055] Integrated Magnetization Analysis of an IPM Motor
This Application Note explains how to determine the changes that occur in a magnetizing field if the making current is changed during magnetization, as well as how to obtain the i…
-
[JAC080] Cogging Torque Analysis of an SPM Motor with Skewed Magnetization
This Application Note presents the use of a magnetic field analysis to obtain the flux density distribution, cogging torque, and induced voltage of an SPM motor that has skewed ma…
-
[JAC058] Efficiency Analysis of an IPM Motor
This Application Note presents the use of magnetic field analysis to obtain the efficiency of an IPM motor in each current phase with a rotation speed of 1800 rpm and the current …
-
[JAC068] Speed Versus Torque Characteristic Analysis of a Three-Phase Induction Motor
This Application Note explains an analysis that confirms the Speed-Torque curve and current density distribution of an induction motor.
-
[JAC063] Analysis of Torque Characteristics of a Cage Induction Motor
This Application Note introduces a case example that obtains the Slip-Torque curve, Torque-Current curve, Current-Voltage curve at maximum torque, and the Current-Joule Loss curve…
-
[JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress
This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.
-
[JAC024] Cogging Torque Analysis of an SPM Motor with a Skewed Stator
This note presents the use of magnetic field analysis to evaluate the cogging torque of an SPM motor with a skewed stator.
