- Sort condition
- Newest first
- Oldest first
- Large number of views
[JAC190] Arrangement Optimization of Wireless Power Transfer System
This document introduces the procedure in obtaining the optimum solution for geometries of transmission coils (angle that defines position) for simple magnetic resonance wireless …
[JAC017] Inductance Analysis of an IPM Motor
This Application Note explains how to obtain the current phase angle characteristics of a dq axis inductance that accounts for magnetic saturation and flux leakage in an IPM motor.
[JAC195] Torque characteristics analysis of three-phase induction motors using 3D correction function
This document introduces introduces a case study which obtains inductance correction values, and then obtains N-T characteristics (revolution speed-torque characteristics) using t…
[JAC199] Efficiency Analysis of Wireless Power Transfer via Electromagnetic Induction Method using Resonance Circuits
This example presents, an electromagnetic induction-type wireless power supply system using an excitation circuit positioned with a parallel resonance condenser on the receiving e…
[JAC193] Calculation of Equivalent Circuit Parameters of Single-Phase Induction Motors
In this document, we will be obtaining the secondary resistance, leakage inductance and excitation inductance of main winding of capacitor-start single-phase induction motor that …
[JAC179] Analysis of SR Motor Static Characteristics
This example presents an evaluation for each rotor position of the effect on flux linkage (shown as I-Psi characteristics below) when excitation current is changed.
[JAC154] Calculation of Equivalent Circuit Parameters in a Three-Phase Induction Motor
This Application Note explains how to obtain the secondary resistance, leakage inductance, and excitation inductance of an induction motor when its power supply frequency has been…
[JAC158] Superimposed Direct Current Characteristic Analysis of a Reactor That Accounts for Minor Hysteresis Loops
This Application Note presents the use of the frozen permeability condition to obtain the superimposed direct current characteristic that includes minor hysteresis loops of a high…
[JAC052] Inductance Analysis of a Sheet Coil Transformer
This Application Note explains how to obtain the self-inductance and leakage inductance of a sheet coil transformer.
[JAC105] Leakage Inductance Analysis of a Transformer
This Application Note explains how to obtain self-inductance and leakage inductance for two types of secondary coiling in a transformer: uniform coiling and close coiling.
[JAC077] Inductance Analysis of an RFID Tag
This Application Note performs a magnetic field analysis of an RFID tag that has a metallic film and a magnetic sheet with a resonance frequency of 13.56 MHz, and obtains the magn…
[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-
This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.
[JAC101] AL-Value Current Characteristic Analysis of a Choke Coil
This note presents the use of a magnetic field analysis to obtain the AL-value current properties of a choke coil.
[JAC060] Superimposed Direct Current Characteristic Analysis of a Reactor
This Application Note explains a case example that obtains the superimposed direct current characteristics of a high-frequency reactor when the gap width is changed.
[JAC099] Superimposed Direct Current Characteristic Analysis of a High Current Reactor
This Application Note presents how to obtain a high-current reactor’s superimposed direct current characteristics when the gap length is varied.
[JAC143] Inductance Analysis of an Air Core Coil
This analysis shows how to obtain an air core coil’s inductance through analysis and compare it with theoretical values.