DP
Transient Magnetic (2D/Axisymmetric)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN –Direct Link-
In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.
-
[JAC104] Thrust Force Analysis of a Linear Induction Motor
This Application Note presents how to obtain thrust force characteristics for a linear inductance motor.
-
[JAC084] Electromagnetic Forming Analysis of a Tube
This Application Note explains how to obtain the Lorentz force density distribution generated in a tube when current is run through a coil.
-
[JAC087] Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting
This document will compare the results of iron loss accounting for only the size of stress, and iron loss accounting for changes in magnetic flux density over time for each princi…
-
[JAC061] Current Distribution Analysis of a Choke Coil
This Application Note explains a case example that obtains the current distribution in a choke coil.
-
[JAC091] Iron Loss Analysis of an IPM Motor Including the Effects of Press Fitting Stress
This Application Note presents modeling the press fitting of a core and frame with the Press Fit condition and then obtaining the iron loss density of an IPM motor with and withou…
-
[JAC111] Starting Performance Analysis of a Universal Motor
This document introduces the use of a magnetic field analysis to obtain the speed versus time graph, the current waveform, and the torque versus time graph for a universal motor.
-
[JAC071] Basic Characteristic Analysis of a Motor with 2 Brushes, 6 Poles, and 19 Slots
This Application Note presents an analysis to obtain the speed versus torque and torque versus current for a motor that has 2 brushes, 6 poles, and 19 slots.
-
[JAC074] Speed Versus Torque Analysis of a Single-Phase Induction Motor
This Application Note explains how to obtain the current density distribution and Speed-Torque curve created by auxiliary winding that uses a capacitor.
-
[JAC120] Thermal Demagnetization Analysis of an SPM Motor
This Application Note presents how to change the temperature of permanent magnets in an analysis, and then evaluate the effects on the torque waveform, magnetic flux density distr…
-
[JAC106] Iron Loss Analysis of a Brush Motor
This note presents how to obtain the iron loss in the stator core and rotor core of a brush motor.
-
[JAC046] Sensitivity Analysis of the Magnetization Pattern of an SPM Motor
This Application Note presents the use of a magnetic field analysis to obtain the surface flux density for radial pattern, parallel anisotropic pattern, and polar anisotropy patte…
-
[JAC119] Torque Characteristic Analysis of a Three Phase Wound Rotor Induction Motor
This Application Note shows how to obtain the current density distribution and slip-torque curve.
-
[JAC121] Output Analysis of a Salient-Pole Synchronous Generator
This Application Note presents the use of a magnetic field analysis to obtain the magnetic flux density distribution, no-load saturation curve, and output of a salient-pole synchr…
-
[JAC056] Torque Characteristics Analysis of a Self Starting Type Permanent Magnet Motor
This Application Note shows how to obtain the current density distribution and slip versus torque curve.
-
[JAC114] Vibration Analysis of an Outer Rotor Motor
This note presents the use of a magnetic field analysis and structural analysis to obtain the sound pressure caused by electromagnetic vibrations in an outer rotor motor with hole…
