LS
Iron Loss Calculation
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC239] Fault Analysis in an IPM Motor
In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…
-
[JAC269] Creating Three-Phase Induction Motor Efficiency Maps Accounting for Harmonics
In this example, efficiency maps are created for a three-phase induction motor accounting for PWM carrier and slot harmonics. These are compared with efficiency maps when harmonic…
-
[JAC235] Reactor Core Stray Loss Analysis
In this example, reactor core stray loss is described.
-
[JAC278] Creating Six-Phase Induction Motor Efficiency Maps
In this example, a six-phase induction motor efficiency map is created in the concept design stage, and each operating point slip and iron loss are evaluated.
-
[JAC165] Creating IPM Motor Efficiency Maps
In this example, an efficiency map of an IPM motor is created and the loss ratios at each operating point are evaluated.
-
[JAC217] Creating Efficiency Maps for 3-Phase Induction Motors
In this example, the use of JMAG-RT Viewer to create efficiency maps for three-phase induction motors when drive temperatures change.
-
[JAC228] Induction Motor Thermal Analysis
In this example, evaluating induction motor temperature distribution.
-
[JAC264] Creating 6-Phase IPM Motor Efficiency Maps
In this example, the efficiency map of a 6-phase IPM motor is created with loss ratios at each operating point also evaluated.
-
[JAC276] Six-Phase IPM Motor Harmonic Iron Loss Analysis
In this example, confirming the effects of carrier harmonics on the iron loss of a six-phase IPM motor are explained here.
-
[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor
In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.
-
[JAC260] Creating Axial Gap-Type Motor Efficiency Maps
In this example, the motor performance of axial gap-type motors with changes made to the flatness ratios.
-
[JAC200] Iron Loss Analysis of IPM Motor using Hysteresis Model
In this example, a hysteresis model accounting for minor loops of the direct current bias magnetism and the lamination analysis function accounting for eddy current distribution i…
-
[JAC201] Iron Loss Analysis of an SR Motor
This example, to accurately capture iron loss that occurs in the SR motor, we will introduce hysteresis loss accounting for the hysteresis loop of the materials and the iron loss …
-
[JAC142] Press Fit Analysis of a Divided Core
This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…
-
[JAC181] Analysis of SR Motor Drive Characteristics
This example presents how to confirm drive characteristics such as torque, loss, and efficiency in a motor when its switch timing changes for each rotation speed.
-
[JAC202] Core Stray Loss Analysis of Power Transformer
This document introduces runs analysis by modeling the short-circuit test that is conducted when evaluating stray loss and obtains stray loss distribution in the core close to the…
