Transient Magnetic (3D)
149 – Analysis of Magnetic Force Acting on the Arc of a Vacuum Circuit Breaker
This Application Note presents how to calculate the current density and Lorentz force of a vacuum circuit breaker, and obtain its arc-diffusing force.
150 – Electromagnetic Repulsion Analysis of a Vacuum Circuit Breaker
This Application Note presents how to obtain the electromagnetic repulsion in a circuit breaker from the Lorentz force when a 100 kA current is flowing.
140 – Analysis of Electromagnetic Repulsion Produced in Small Contact Bridges
This Application Note presents the use of a magnetic field analysis to obtain the electromagnetic repulsion when a switch is closed, creating a contact bridge.
129 – Analysis of a PM Stepper Motor Accounting for Magnetization
In this analysis, a magnetization device model is created and a magnet is magnetized. The magnetization distribution and surface magnetic flux density of the magnetized magnet, an…
126 – Magnetization Analysis Accounting for Eddy Currents
This Application Note presents how to obtain the magnetization field distribution accounting for eddy currents in the magnetic material to be magnetized, the eddy current density …
44 – Resistance Heating Analysis of a Steel Sheet
This Application Note presents how to obtain the calculate current density distribution, Joule loss distribution and temperature distribution of steel sheet.
116 – Operating Time Analysis of an Injector by Evaluating the Reduction in Eddy Currents
This Application Note explains how to apply direct current voltage to a solenoid injector and obtain its response characteristics by accounting for effects from eddy currents. The…
109 – Operating Time Analysis of an Electromagnetic Relay Accounting for Eddy Currents
This Application Note presents the use of the motion equation function to evaluate the operating time of an electromagnetic relay with DC voltage drive. Eddy currents generated in…
60 – Superimposed Direct Current Characteristic Analysis of a Reactor
This Application Note explains a case example that obtains the superimposed direct current characteristics of a high-frequency reactor when the gap width is changed.
99 – Superimposed Direct Current Characteristic Analysis of a High Current Reactor
This Application Note presents how to obtain a high-current reactor’s superimposed direct current characteristics when the gap length is varied.
94 – Analysis of Detent Torque of a PM Stepper Motor
This Application Note describes how the detent torque can be calculated for a PM stepper motor.
43 – Torque Analysis of a Coreless Motor
This Application Note presents an evaluation of the torque waveform of a coreless motor when current is running.
89 – Stiffness Torque Analysis of a PM Stepper Motor
This Application Note describes how the stiffness torque at 0.5 A of current can be calculated for a PM stepper motor.
80 – Cogging Torque Analysis of an SPM Motor with Skewed Magnetization
This Application Note presents the use of a magnetic field analysis to obtain the flux density distribution, cogging torque, and induced voltage of an SPM motor that has skewed ma…
54 – Analysis of the Cogging Force of a Moving Coil Linear Motor
This Analysis Note explains how to obtain the magnetic flux density distribution and cogging in a moving coil linear motor with skew applied to its magnets.
67 – Analysis of AC Loss in a Superconductor
This note presents the use of magnetic field analysis to obtain the AC loss in a superconductive filament.