Axial Gap Type Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC159] Sensitivity Analysis of Dimensional Tolerance in an SPM Motor
This Application Note presents how to assume a dimensional tolerance of ±0.4 mm for a chamfer, and find out whether changing dimensions within the tolerance range has an effect on…
-
[JAC056] Torque Characteristics Analysis of a Self Starting Type Permanent Magnet Motor
This Application Note shows how to obtain the current density distribution and slip versus torque curve.
-
[JAC068] Speed Versus Torque Characteristic Analysis of a Three-Phase Induction Motor
This Application Note explains an analysis that confirms the Speed-Torque curve and current density distribution of an induction motor.
-
[JAC063] Analysis of Torque Characteristics of a Cage Induction Motor
This Application Note introduces a case example that obtains the Slip-Torque curve, Torque-Current curve, Current-Voltage curve at maximum torque, and the Current-Joule Loss curve…
-
[JAC193] Calculation of Equivalent Circuit Parameters of Single-Phase Induction Motors
In this document, we will be obtaining the secondary resistance, leakage inductance and excitation inductance of main winding of capacitor-start single-phase induction motor that …
-
[JAC114] Vibration Analysis of an Outer Rotor Motor
This note presents the use of a magnetic field analysis and structural analysis to obtain the sound pressure caused by electromagnetic vibrations in an outer rotor motor with hole…
-
[JAC046] Sensitivity Analysis of the Magnetization Pattern of an SPM Motor
This Application Note presents the use of a magnetic field analysis to obtain the surface flux density for radial pattern, parallel anisotropic pattern, and polar anisotropy patte…
-
[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor
In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.
-
[JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress
This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.
-
[JAC024] Cogging Torque Analysis of an SPM Motor with a Skewed Stator
This note presents the use of magnetic field analysis to evaluate the cogging torque of an SPM motor with a skewed stator.
-
[JAC040] Cogging Torque Analysis of an SPM Motor
This Application Note presents the use of magnetic field analysis to obtain the cogging torque of an 8-pole, 9-slot SPM motor, which has relatively small period.
-
[JAC029] Iron Loss Analysis of an SPM Motor with Overhanging Magnet
This Application Note presents the use of a no-load iron loss analysis of an SPM motor with and without an overhanging magnet.
-
[JAC039] Torque Analysis of a Three Phase Induction Motor Accounting for the Skew
This Application Note presents a comparison of the torque waveforms of three phase squirrel cage induction motors with and without torque, and introduces the effects of using skew…
-
[JAC001] Torque Characteristic Analysis of a Three Phase Induction Motor
This Application Note introduces a case example of how to obtain the current density distribution of an auxiliary conductor and its rotation speed versus torque characteristics.
-
[JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting
This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.
