Axial Gap Type Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC177] Torque Characteristic Analysis of a Three Phase Induction Motor
This Application Note explains how to obtain the torque characteristics in an induction motor when the current amplitude has been changed in a specific slip.
-
[JAC173] Basic Characteristic Analysis of an IPM Motor
This Application Note demonstrates an analysis in which an IPM motor's cogging torque, torque, magnetic flux density distribution, and iron loss in the stator core are obtained.
-
[JAC166] Line Start Simulation of an Induction Machine Using a Control Simulator and the JMAG-RT
This Application Note explains how to use the JMAG-RT to create a JMAG-RT model of an induction motor, import it to a circuit/control simulator, and run an induction motor line st…
-
[JAC176] Drive Characteristic Analysis of a Three-Phase Induction Motor
This Application Note explains how to confirm drive characteristics such as torque, loss, and efficiency in an induction motor when its rotation speed changes.
-
[JAC154] Calculation of Equivalent Circuit Parameters in a Three-Phase Induction Motor
This Application Note explains how to obtain the secondary resistance, leakage inductance, and excitation inductance of an induction motor when its power supply frequency has been…
-
[JAC120] Thermal Demagnetization Analysis of an SPM Motor
This Application Note presents how to change the temperature of permanent magnets in an analysis, and then evaluate the effects on the torque waveform, magnetic flux density distr…
-
[JAC074] Speed Versus Torque Analysis of a Single-Phase Induction Motor
This Application Note explains how to obtain the current density distribution and Speed-Torque curve created by auxiliary winding that uses a capacitor.
-
[JAC161] Line Start Analysis of a Three-phase Induction Machine
This Application Note presents an analysis that simulates the line start of an induction motor and obtains the starting performance of its rotation speed variations.
-
[JAC156] Segregation Analysis of Torque Components for an IPM Motor
In this Application Note, the torque components are separated and the magnetic flux density distributions created by each magnetomotive force are confirmed.
-
[JAC163] Torque-Current Curve Analysis of an SPM Motor
This Application Note presents how to obtain the torque-current curve as a basic property of one type of permanent magnet synchronous motor, the surface permanent magnet synchrono…
-
[JAC108] Centrifugal Force Rupture Analysis of a Ring Magnet
This Application Note presents how to obtain the stress distribution of a ring magnet in an SPM motor rotating at high speeds.
-
[JAC157] Analysis of Eddy Currents in an IPM Motor Using the Gap Flux Boundary
This Application Note explains how to use the gap flux boundary condition to evaluate the eddy current loss in the magnet by changing the number of magnet divisions. This will mak…
-
[JAC069] Iron Loss Analysis of an IPM Motor
This Application Note explains a case example that obtains the iron loss and its distribution in a permanent magnet motor.
-
[JAC131] Stray Capacitance Analysis of a Motor
This note presents the use of analysis to obtain the stray capacitance between an IPM motor’s coil and stator core, between its rotor core and stator core, and between the inner a…
-
[JAC091] Iron Loss Analysis of an IPM Motor Including the Effects of Press Fitting Stress
This Application Note presents modeling the press fitting of a core and frame with the Press Fit condition and then obtaining the iron loss density of an IPM motor with and withou…
-
[JAC119] Torque Characteristic Analysis of a Three Phase Wound Rotor Induction Motor
This Application Note shows how to obtain the current density distribution and slip-torque curve.
