HT

Steady/Transient Thermal (3D)

Sort condition
Newest first
Oldest first
Large number of views
  1. Magnetic Field and Thermal Analysis of Motors Using JMAG

    Daiki Matsuhashi, MEIDENSHA CORPORATION

  2. Computer Analysis of Dual Frequency Induction Heating using JMAG-Studio

    Takashi Horino, NETUREN CO.,LTD.

  3. [JAC045] High-Frequency Induction Heating Analysis of an IH Cooking Heater

    This Application Note shows how to obtain the magnetic flux density surrounding an IH cooking heater that uses high frequency induction heating and the temperature distribution of…

  4. [JAC013] High-Frequency Induction Heating Analysis of a Shaft

    This Application Note explains how to create a numerical analysis model and analyze the elevated temperature process in order to use the coil geometry and current conditions (powe…

  5. [JAC051] High-Frequency Induction Heating Analysis of a Gear

    This Application Note shows how to create a numerical analysis model when obtaining the optimum coil geometry and current conditions (power supply frequency and current value), an…

  6. [JAC050] High-Frequency Induction Heating Analysis of a Steel Wire (Translational Induction Hardening)

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…

  7. [JAC049] High-Frequency Induction Heating Analysis of a Steel Sheet

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…

  8. [JAC047] High-Frequency Induction Heating Analysis of a Crankshaft

    This Application Note shows an example of an evaluation performed by creating a numerical analysis model, analyzing the elevated temperature process, and seeing whether or not the…

  9. [JAC048] High-Frequency Induction Heating Analysis of a Printer Roller

    This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…

  10. [JAC118] Thermal Analysis of a Bus Bar

    This Application Note presents how to obtain the temperature distribution in a bus bar or the like with changes in the power supply frequency.

  11. [JAC044] Resistance Heating Analysis of a Steel Sheet

    This Application Note presents how to obtain the calculate current density distribution, Joule loss distribution and temperature distribution of steel sheet.

  12. Effect of magnetic property on the accuracy of induction heating analysis

    Hiroshi Yuki, NTN Corporation

  13. Development of the self fluxing alloy fusing process with the control system using the simulation

    Tomoji Osada, NIPPON THERMONICS Corporation.

  14. The Design of Superconducting Magnets Using JMAG

    Jun Yoshida, Sumitomo Heavy Industries, Ltd.

  15. Case Studies Using JMAG in Electric Motor Development

    Miho Shimada, KYB Corporation

  16. Crankshaft optimization of induction heat treatment using computer aided engineering(The second report)

    Akiko Inami, Fuji Heavy Industries LTD.

Search Filter

  • All Categories