Transient Magnetic (3D)

Sort condition
Newest first
Oldest first
  1. 64 – Thrust Force Analysis of a Coreless Linear Motor

    In this example, explains how to obtain the thrust variations in a coreless linear motor when it is driven with a three-phase alternating current.

  2. 8 – Analysis of an Axial Gap Motor

    In this example, how to use JMAG's 3D magnetic field analysis to carry out a load analysis of an axial gap motor, and then obtain the Torque-Speed curve and the Torque-Current cur…

  3. 7 – Analysis of a Spindle Motor

    In this example, how the Speed-Torque curve, the Torque-Current curve and the magnetic flux density distribution of a spindle motor can be obtained.

  4. 18 – Thermal Analysis of a Motor

    This Application Note explains how to evaluate a motor’s temperature distribution by creating a thermal analysis model that can investigate the loss analysis and temperature distr…

  5. [JFT079] Applying the Extended Slide Function to a Translation Motion Model

    In this document, how to apply the extended slide function to a translation motion model is presented.

  6. 251 – Alternator Vibration Analysis

    In this example, the electromagnetic force generated in the stator core of a claw pole alternator is obtained, and acceleration is evaluated with an electromagnetic force - struct…

  7. 255 – Evaluating the N-T Curve of an IPM motor Using 3D Correction

    In this example, obtains N-T curves using the correction function.

  8. Analysis of LIM-type Eddy-Current Rail Brakes using Large Scale Model

    Hiroshi Yoda, Railway Technical Research Institute

  9. 219 – Axial Gap Motor Cogging Torque Analysis

    In this example, presents a case study to obtain the cogging torque in an axial flux motor.

  10. [JFT055] Variable Magnet Analysis Using Subroutines

    This document describes the method for analyzing variable magnets using subroutines.

  11. 235 – Reactor Core Stray Loss Analysis

    In this example, reactor core stray loss is described.

  12. 195 – Torque characteristics analysis of three-phase induction motors using 3D correction function

    This document introduces introduces a case study which obtains inductance correction values, and then obtains N-T characteristics (revolution speed-torque characteristics) using t…

  13. [RTML-046] ALTERNATOR_01

    Type: ALTERNATOR | Stator(Outside Diameter): 140(mm) | Height: 45(mm) | Voltage/Current: DC200(V) | Rotor/Mover: WF

  14. [JFT021] Setting Magnet Material with Coercive Force Distribution and Residual Magnetic Flux Distribution Considering Temperature Dependence

    This document describes how to set a magnet material with coercive force and residual magnetic flux density taking into account temperature dependence.

  15. 237 – AC Loss Analysis of an IPM Motor

    In this example, we introduce the case study that evaluates AC losses in coils of an IPM motor.

  16. 216 – Simulation of a Claw-Pole Type Alternator Using Control Simulator and JMAG-RT

    In this example, the output voltage and field current of a claw-pole type alternator is checked when the rotor speed is changed.

Search Filter

  • All Categories