Structural
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Verification of Temperature Distribution and Thermal Strain Level with Induction Heating for Thin Plates
Hidemasa Wakabayashi, Y-tec Corporation
-
[JAC254] Vibration Analysis of a Large Oil-Filled Transformer
In this example, evaluating vibration caused by electromagnetic excitation in a large transformer. Since large transformers are oil-cooled, in this example the oil, which is the f…
-
[L-MU-91] NVH analysis of EV drivelines with JMAG and Romax Nexus
NVH is the one of most critical issues in the drivelines development of EV/ HEV. There are several points to be considered for the NVH analysis of the driveline. To evaluate the N…
-
[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)
This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…
-
[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation
In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.
-
[W-MA-47] Toward Practical Application of Iron Loss Analysis Taking Stress into Account
Increasing the accuracy of an iron loss analysis for a magnetic field analysis poses challenges. With conventional iron loss calculation methods, the iron loss characteristics of …
-
Analyzing Permanent Magnet Motors with Magnetic Field + Structural Coupling Using PSL (Power Simulation Licenses)
Makoto Matsushita, Toshiba Infrastructure Systems & Solutions Corporation / Takashi Nakaoka, JSOL Corp.
-
Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening
Yohei Awata, Denki Kogyo Co.,Ltd.
-
Low Oscillation Actuator for Force-controlled Medical Robot Arm
Tetsuharu Fukushima, Sony Imaging Products & Solutions Inc.
-
Analysis of the Electromagnetic NVH of Electrical Machines
Stephan Guenther, AVL Software and Functions GmbH
-
Investigating the Possibility of Improving Performance by Applying CFRP to Outer Rotor Housing
Yoshiyuki Sakashita, PUES Corporation
-
Right First Time Design of e-Drive NVH
Hiroshi Koyama, Romax Technology Japan Limited
-
[JAC142] Press Fit Analysis of a Divided Core
This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…
-
[JAC020] Sound Pressure Analysis of an SPM Motor
This Application Note shows an example of an evaluation of a reactor’s sound pressure, when acquiring electromagnetic force generated by a stator core for a SPM motor and linking …
-
[L-MU-07]Multiphysics Analysis by Linking with Specialized Tools
The mapping function between models with different dimensions in a JMAG multiphysics analysis can also be used when running a coupled analysis with other tools. JMAG makes it poss…
-
[JAC198] Bus Bar Thermal Stress Analysis
Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.
