Sort condition
Newest first
Oldest first
  1. 251 – Alternator Vibration Analysis

    In this example, the electromagnetic force generated in the stator core of a claw pole alternator is obtained, and acceleration is evaluated with an electromagnetic force - struct…

  2. 218 – High-Frequency Induction Hardening Analysis Accounting for Deformation

    In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.

  3. [L-TR-44] Winding Vibration Analysis of a Power Transformer

    Winding vibration originating from a transformer is a vibration phenomenon that uses Lorentz force as the vibration force, which occurs when flux leakage from the winding works on…

  4. [W-MA-47] Toward Practical Application of Iron Loss Analysis Taking Stress into Account

    Increasing the accuracy of an iron loss analysis for a magnetic field analysis poses challenges.

  5. 223 – Multi-Objective Optimization of IPM Motors Considering Stress at High Rotation

    In this example, presented where a rotor geometry is designed by a multi-objective genetic algorithm with objective functions for torque characteristics (5,000 r/min) and for the …

  6. Analyzing Permanent Magnet Motors with Magnetic Field + Structural Coupling Using PSL (Power Simulation Licenses)

    Makoto Matsushita, Toshiba Infrastructure Systems & Solutions Corporation / Takashi Nakaoka, JSOL Corp.

  7. Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening

    Yohei Awata, Denki Kogyo Co.,Ltd.

  8. Analysis of the Electromagnetic NVH of Electrical Machines

    Stephan Guenther, AVL Software and Functions GmbH

  9. Investigating the Possibility of Improving Performance by Applying CFRP to Outer Rotor Housing

    Yoshiyuki Sakashita, PUES Corporation

  10. Right First Time Design of e-Drive NVH

    Hiroshi Koyama, Romax Technology Japan Limited

  11. Low Oscillation Actuator for Force-controlled Medical Robot Arm

    Tetsuharu Fukushima, Sony Imaging Products & Solutions Inc.

  12. 254 – Vibration Analysis of Oil-Immersed Large Transformer

    This document introduces a case example of evaluating the vibrations of a large transformer. Parts that are usually the source of vibrations are the core, tank, and windings, but …

  13. 226 – Vibration Characteristics Analysis of SPM Motors

    In this example, the acceleration is evaluated by obtaining the electromagnetic force generated in the stator core of the SPM motor at multiple rotation speeds and coupling with t…

  14. 142 – Press Fit Analysis of a Divided Core

    This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…

  15. 20 – Sound Pressure Analysis of an SPM Motor

    This Application Note shows an example of an evaluation of a reactor’s sound pressure, when acquiring electromagnetic force generated by a stator core for a SPM motor and linking …

  16. [L-MU-91]NVH analysis of EV drivelines with JMAG and RomaxDESIGNER

    NVH is the one of most critical issues in the drivelines development of EV/ HEV. There are several points to be considered for the NVH analysis of the driveline. To evaluate the N…

Search Filter