JMAG-Designer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Initiatives in Induction Hardening Simulation by coupling JMAG and Simufact
Ippei Ohnuma, NDK Inc.
-
Optimizing Motor Shrink Fitting Process Conditions using Induction Heating
Keisuke Ando, NIPPON THERMONICS CO.,LTD
-
Analysis of Electromagnetic Force Acting on a Workpiece During Induction Heating
Go Hagimoto, NSK Ltd.
-
1 : JMAG-Ansys-Optimus Electromagnetic Field-Structure Analysis 2 : AI and PIDO Integration -Fast non-parametric shape optimisation-
Mio Hashiba, CYBERNET SYSTEMS CO., LTD.
-
[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets
In this example, analysis is performed while varying the temperature of magnetized magnets, and then the influence on the torque waveform and magnetic flux density distribution is…
-
[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-
This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.
-
[JFT153] Topology Optimization Calculations Using CNN Surrogate Models
This document describes as the workflow for topology optimization calculations using CNN surrogate models running topology optimization for creating a CNN surrogate model, creatin…
-
[JFT115] Recalculating Electromagnetic Force and Torque Waveforms
This document describes the method for calculating electromagnetic force as the post-processing of magnetic field analysis.
-
[JAC034] Demagnetization Analysis of an SPM Motor
This note presents the use of a magnetic field analysis to evaluate the demagnetizing ratio distribution of an of an SPM motor by changing the current flow.
-
[JAC203] No-Load Test Analysis of Power Transformer
This example focuses on modeling in the analysis of no-load tests in JMAG and obtains the magnetic flux line, current, excitation conductance, and excitation susceptance that can …
-
[JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models
In this example, the dimensions of an axial gap motor are optimized by using surrogate models, then the Pareto curves and the effect of reduction in calculation times when using s…
-
[JAC292] Evaluating Energy Consumption During Drive Cycle Using Loss Maps with Temperature Dependency for IPM Motors
In this example, loss maps with temperature dependency for an IPM motor are used to compare and evaluate the energy consumption and efficiency during a WLTC drive cycle while usin…
-
[JAC286] IPM Motor Iron Loss Analysis Accounting for PWM -Evaluation with Different Modulation Methods-
In this example, the effects on iron loss when the modulation method for PWM control is changed are evaluated.
-
[JFT184] Using a Script to Remove Unnecessary Steps From Result Files
This document explains how to remove unnecessary steps from a result file.
-
[JFT185] Using User Geometry in JMAG-Express (Ver.23.0 and later)
This document describes the procedures to let you run performance evaluations in JMAG-Express by using geometry created with external CAD.
-
[JAC010] Thermal Analysis of a Radiant Heater
This Application Note explains how to carry out a thermal analysis using the thermal radiation phenomenon between a heater and a heated body to obtain the differences in temperatu…