JMAG-Designer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC117] Iron Loss Analysis of a Transformer
This Application Note presents how to obtain the iron loss and the ratio of hysteresis loss and joule loss within that iron loss for a three-phase transformer.
-
[JAC110] Loss Analysis of a Choke Coil
This Application Note shows how to obtain the iron loss and copper loss in a choke coil.
-
[JAC075] Iron Loss Analysis of a Reactor
This Application Note analyzes the iron loss of a reactor.
-
[JAC101] AL-value Current Characteristics Analysis of a Choke Coil
This note presents the use of a magnetic field analysis to obtain the AL-value current properties of a choke coil.
-
[JAC084] Electromagnetic Forming Analysis of a Tube
This Application Note explains how to obtain the Lorentz force density distribution generated in a tube when current is run through a coil.
-
[JAC100] Surface Heating Analysis of a Steel Plate
This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …
-
[JAC104] Thrust Force Analysis of a Linear Induction Motor
This Application Note presents how to obtain thrust force characteristics for a linear inductance motor.
-
[JAC108] Centrifugal Force Rupture Analysis of a Ring Magnet
This Application Note presents how to obtain the stress distribution of a ring magnet in an SPM motor rotating at high speeds.
-
[JAC048] High-Frequency Induction Heating Analysis of a Printer Roller
This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…
-
[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN –Direct Link-
In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.
-
[JAC099] Superimposed Direct Current Characteristics Analysis of a High Current Reactor
This Application Note presents how to obtain a high-current reactor’s superimposed direct current characteristics when the gap length is varied.
-
[JAC069] Iron Loss Analysis of an IPM Motor
This Application Note explains a case example that obtains the iron loss and its distribution in a permanent magnet motor.
-
[JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor
This Application Note demonstrates a case study where the effects of a carrier harmonic against an IPM motor’s iron loss is confirmed using estimated harmonic current waveform as …
-
[JAC095] Analysis of a Universal Motor
This note presents how the characteristics of a universal motor can be obtained, including torque versus current (T-I), torque versus speed (T-N), and magnetic flux density distri…
-
[JAC094] Analysis of Detent Torque of a PM Stepper Motor
This Application Note describes how the detent torque can be calculated for a PM stepper motor.
-
[JAC083] Magnetic Shielding Analysis of an Induction Furnace
This Application Note displays magnetic flux density distribution to evaluate the differences in magnetic flux with and without yokes.
