MBD
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Ultra-high Fidelity Hardware in the Loop (HIL) Simulation for EV Motor Drives with Seamless Integration with JMAG-RT
Petar Gartner/Ivan Celanovic, Typhoon HIL, Inc
-
How to Leverage JMAG-RT for MBD and Its Prospects
Shingo Soma, Honda Motor Co., Ltd
-
[RTML-040] PMSM/SPM Constant rating 1(kW) 6-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53.4(mm) | Height: 37.5(mm) | Voltage/Current: DC100(V)/10(A) | Rotor/Mover: SPM | Average torque: 4(N·m)
-
[RTML-042] SynRM_01 3-phase
Type: SynRM | Max Power: 0.01(kW) | Stator(Outside Diameter): 150(mm) | Height: 37.5(mm) | Voltage/Current: DC288(V)/5(A) | Rotor/Mover: RM | Average torque: 0.8(N·m)
-
[RTML-044] WFSM_01
Type: WFSM | Max Power: 2(kW) | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF | Number of Phases: 3
-
[JFT125] Inheriting Operating Points Between Modes in Efficiency Map Studies
This document describes the method for using operating point information obtained with speed priority mode in accuracy priority mode.
-
[W-MB-66] Accuracy Improvements in the JMAG-RT Induction Machine Model
In this paper, improvements in the accuracy of induction machine plant models when applied to automobile drive motors are discussed.
-
[RTML-048] WFSM_02
Type: WFSM | Max Power: 2(kW) | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF | Number of Phases: 6
-
[RTML-049] PMSM/IPM Constant rating 75(kW) 3-phase Resolver
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
-
[RTML-050] PMSM/IPM 3-Phases Delta
Type: PMSM | Power: 150(W) | Stator(Outside Diameter): 112(mm) | Height: 65(mm) | Voltage/Current: DC24(V)/4(A) | Rotor/Mover: IPM
-
[RTML-043] SRM_01 3-phase
Type: SRM | Max Power: 0.5(kW) | Stator(Outside Diameter): 160(mm) | Height: 75(mm) | Voltage: DC150(V) | Rotor/Mover: RM
-
[JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motor
In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…
-
[JFT070] Creating PM Motor Efficiency Maps Using JMAG-Designer (Accuracy Priority Mode)
This document describes how to create efficiency map studies (accuracy priority mode) using a JMAG-Designer efficiency map study (speed priority mode).
-
Re-consideration of E-machine Thermal Management Using Recent Capabilities of Numerical Simulation
Makoto Sato, Siemens PLM Software Computational Dynamics, K.K
-
Combining Computational Fluid Dynamics and Electromagnetic Finite Element Simulations for Transient and Steady State Motor Cooling Simulations
Tristan Burton, Convergent Science, Inc.
-
Motor Drive Verification Using HILS Implemented with JMAG-RT Models
Masamichi Inoue, Mitsubishi Electric Corporation