Induction Heating
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Induction Heating Analysis Using Current Control
Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.
-
Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening
Yohei Awata, Denki Kogyo Co.,Ltd.
-
[JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear
In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.
-
[JAC186] Gear Induction Hardening Analysis Using Two Frequencies
In this material, the validity of coil geometry used for quenching is evaluated by heating the gear top and bottom at high and low frequencies, respectively, to confirm uniform te…
-
[JAC183] Agitation Force Analysis of an Induction Furnace
This analysis will evaluate the size of Lorentz force required to agitate and where this is generated.
-
[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…
-
Investigations in Coil Design for Induction Heating Using JMAG and the Optimization Tool HEEDS
Toshiaki Matsumura, AW ENGINEERING CO.,LTD.
-
Design Exploration of Heating Coil Shape by Cooperation of JMAG and HEEDS
Hiroshi Yuki, NTN corporation
-
Shape Optimization of Induction Heating Coil by JMAG – Optimus Cooperation
Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.
-
Introduction and Application of JMAG on Induction Heating
Tomohiro Adachi, DAI-ICHI KIDEN CO., LTD.
-
Feedback control assisted IH analysis
Hiroshi Yuki, Advanced technology R&D center, NTN Corporation
-
Metal Induction Heating Analysis with Two-Way Coupling of JMAG and STAR-CCM+
Masaki Takeuchi, Production&Procurement Group, Production Technology Center, Equipment Technology Dept., Equipment Design Section, Fuji Electric Co.,Ltd.
-
Analytical Predictions for Residual Stress in Crankshaft Subjected to Induction Hardening
Hideaki Ueda, Reliability Group, Research Center, Research & Development Center, YANMAR CO., LTD.
-
Actuality and Scope on Simulation of Heat Treatment
Dong-Ying JU, Saitama Institute of Techinoligy
-
High-Frequency Induction Heating Simulation using a Coupling of JMAG and COSMAP
Yohei Awata, Denki Kogyo Co., Ltd.
-
Crankshaft optimization of induction heat treatment using computer aided engineering(The second report)
Akiko Inami, Fuji Heavy Industries LTD.
