Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[L-MU-169] Comparing Thermal Circuit Modeling with Experimental Result for an Axial Gap Motor
Comparison of a thermal circuit model with experimental results has been performed in this leaflet. In the thermal circuit, thermal characteristics of each parts are modelled by a…
-
[JAC214] Monitoring the Radial Force Acting on the Teeth of IPM Motors Using Circuit Control Simulation
In this example, an IPM motor as a JMAG-RT model is captured in a control/circuit simulator, and radial forces acting on the teeth during motor driving is monitored while changing…
-
[JAC287] Analysis of Current Conditions for the Maximum Efficiency of a WFSM
In this example, we determine the motor efficiency in relation to the field current for a WFSM when the motor output is kept constant.
-
[JAC037] Vector Control Analysis of an IPM Motor Using Control Simulator and the JMAG-RT
The purpose of this Application Note is to demonstrate how to import a JMAG-RT model to a control/circuit simulator after using the JMAG-RT to obtain the inductance spatial harmon…
-
[JAC134] Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT
This Application Note presents how to use JMAG-RT to obtain the spatial harmonics and current dependency of the thrust and coil inductance, and import them to a circuit/control si…
-
[JAC291] Control Simulation of Switching Number of Poles in a 6-Phase Induction Machine
In this document, the behavior of a 6-phase induction motor during the switching of the number of poles is evaluated by simulation.
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
-
[JAC162] Drive Simulation of an SR Motor using a Control Simulator and JMAG-RT
In this Application Note, after using JMAG-RT to obtain an SR motor’s torque and inductance characteristics, the JMAG-RT model is imported into a circuit/control simulator, voltag…
-
[JAC239] Fault Analysis in an IPM Motor
In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…
-
[JAC243] Voice Coil Motor Control Simulation Using a Control Simulator and JMAG-RT
In this example, circuit simulation is performed to control the position of a mover by loading a JMAG-RT model for a voice coil motor into a control/circuit simulator.
-
San-Eisha Ltd.
A power distribution equipment manufacturer committed to establishing stable power supply and creating a comfortable living environment. A company that manufactures highly reliabl…
-
[L-MO-09] Easily Creating Complex Coil Ends Geometry in a Template
The introduction of square wire coils and higher motor speeds no longer allow coil AC losses to be ignored as a loss factor. Coil AC losses are caused by the skin effect and prox…
-
AISIN CORPORATION（Part l）
We spoke with Ms. Okawa, Associate Officer in charge of the Power Train and Electrification Development of the Powertrain Company, the key figure in technology development and pro…
-
AISIN CORPORATION（Part ll）
Interview of technical experts working on developing the traction system (eAxle) for BEVs (Battery Electric Vehicle).
-
Electrical, Electronics and Information Engineering, Engineering, Nagaoka University of Technology
Value the challenges in developing new technologies, and taking the initiative in motor structure innovations
