SPM Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC040] Cogging Torque Analysis of an SPM Motor
This Application Note presents the use of magnetic field analysis to obtain the cogging torque of an 8-pole, 9-slot SPM motor, which has relatively small period.
-
[JAC015] Cogging Torque Analysis of an SPM Motor with a Step Skewed Magnet
This Application Note presents the use of magnetic field analysis to evaluate the magnetic flux density distribution and cogging torque in each part of an SPM motor with a step sk…
-
[JAC024] Cogging Torque Analysis of an SPM Motor with a Skewed Stator
This note presents the use of magnetic field analysis to evaluate the cogging torque of an SPM motor with a skewed stator.
-
[JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress
This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.
-
[JAC080] Cogging Torque Analysis of an SPM Motor with Skewed Magnetization
This Application Note presents the use of a magnetic field analysis to obtain the flux density distribution, cogging torque, and induced voltage of an SPM motor that has skewed ma…
-
Comparison between IPM and SPM based on Experiment and Analysis Result(Report of Harumi Project1)
Kan Akatsu,Katsuyuki Narita,Yoshuki Sakashita,Takashi Yamada, Tokyo University of Agriculture and Technology/JRI Solutions, Ltd.
-
[JAC108] Centrifugal Force Rupture Analysis of a Ring Magnet
This Application Note presents how to obtain the stress distribution of a ring magnet in an SPM motor rotating at high speeds.
-
[JAC120] Thermal Demagnetization Analysis of an SPM Motor
This Application Note presents how to change the temperature of permanent magnets in an analysis, and then evaluate the effects on the torque waveform, magnetic flux density distr…
-
[JAC046] Sensitivity Analysis of the Magnetization Pattern of an SPM Motor
This Application Note presents the use of a magnetic field analysis to obtain the surface flux density for radial pattern, parallel anisotropic pattern, and polar anisotropy patte…
-
[JAC114] Vibration Analysis of an Outer Rotor Motor
This note presents the use of a magnetic field analysis and structural analysis to obtain the sound pressure caused by electromagnetic vibrations in an outer rotor motor with hole…
-
[JAC159] Sensitivity Analysis of Dimensional Tolerance in an SPM Motor
This Application Note presents how to assume a dimensional tolerance of ±0.4 mm for a chamfer, and find out whether changing dimensions within the tolerance range has an effect on…
-
Utilizing JMAG Designer for 3D Magnetic Field Analysis Models
Yuichi Yoshikawa, Home Appliances Company,Panasonic Corporation
-
Loss analysis and geometry optimization in rotating machines
Katsumi Yamazaki, Chiba Institute of Technology
-
Role of Electrical Machines in Electrification
Ayman M. EL-Refaie, General Electric Global Research Center
-
Study on the Application of the JMAG Optimization Function in Motor Design
Yoshiyuki Sakashita, PUES Corporation
-
Coupled Thermal/Structural/Magnetic Field Analysis Using JMAG
Shinya Tanaka, Solution Division(Kawasaki) CAE Center Kurashiki Gr., JFE Techno-Research Corporation