IPM Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC259] Automatically Searching for Current Phase that Obtains Maximum Torque and Evaluating Torque Characteristics
In this example, the current phase that maximizes the torque is searched for each of three rotor geometries. The motor average currents and torque ripples are evaluated using the …
-
[JAC263] IPM Motor Stress Analysis Taking Into Account Friction between Magnets and the Rotor Core
In this example, in order to evaluate how the contacts between the magnets and the rotor core in an IPM motor affect the stress distribution, the von Mises stress is checked when …
-
[JAC261] SPM Motor Magnet Coercive Force Optimization For Obtaining Sinusoidal Magnetization
In this example, a magnet is segmented into blocks and coercive force is defined. The coercive force of each block is calculated so that the induced voltage waveform approaches a …
-
[JAC022] Analysis of the Eddy Current in the Magnet of an IPM Motor
This Application Note presents the use of a magnetic field analysis in a state of operation to obtain variations in magnet eddy current losses according to the number of divisions…
-
[JAC200] Iron Loss Analysis of IPM Motor using Hysteresis Model
In this example, a hysteresis model accounting for minor loops of the direct current bias magnetism and the lamination analysis function accounting for eddy current distribution i…
-
[JAC030] Magnetization Field Evaluation of an SPM motor
In this example, carry out SPM motor's magnetization to obtain the magnetization field and magnet's surface magnetic flux density.
-
[JAC255] Evaluating the N-T Curve of an IPM motor Using 3D Correction
In this example, obtains N-T curves using the correction function.
-
[JAC241] Single-Phase Synchronous Motor N-T-I Characteristics Analysis
In this example, a use case in which the N-T-I characteristics for a single-phase synchronous motor are obtained is presented.
-
[JAC142] Press Fit Analysis of a Divided Core
This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…
-
[JAC020] Sound Pressure Analysis of an SPM Motor
This Application Note shows an example of an evaluation of a reactor’s sound pressure, when acquiring electromagnetic force generated by a stator core for a SPM motor and linking …
-
[JAC195] Torque characteristics analysis of three-phase induction motors using 3D correction function
This document introduces introduces a case study which obtains inductance correction values, and then obtains N-T characteristics (revolution speed-torque characteristics) using t…
-
[JAC167] Iron Loss Analysis of a Three Phase Induction Motor
This Application Note presents an example of how to find the iron loss in the stator core and rotor core at a rotation speed of 3,300 r/min.
-
[JAC237] AC Loss Analysis of an IPM Motor
In this example, we introduce the case study that evaluates AC losses in coils of an IPM motor.
-
[JAC229] Analysis of the Effect of PWM on the Iron Loss of an Induction Motor
In this example, we introduce a case study to obtain the iron losses of the induction motor that accounts for the PWM input.
-
[JAC194] Analysis of High-Speed Rotation Motors Accounting for Eddy Current
Here we discuss the steps for accounting for eddy current loss occurring in the magnetic steel sheets during a magnetic field analysis, and then analyze the effects on torque.
-
[JAC191] Torque Analysis of Three-Phase Induction Motors Accounting for the Skew Using the Multi-slice Method
In this document, the multi-slice method is used to compare torque waveforms of a cage three-phase induction motor with and without skew, and is then used to verify the effects of…