Eddy Current Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC183] Agitation Force Analysis of an Induction Furnace
This analysis will evaluate the size of Lorentz force required to agitate and where this is generated.
-
[JAC173] Basic Characteristic Analysis of an IPM Motor
This Application Note demonstrates an analysis in which an IPM motor's cogging torque, torque, magnetic flux density distribution, and iron loss in the stator core are obtained.
-
[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…
-
[JAC101] AL-value Current Characteristics Analysis of a Choke Coil
This note presents the use of a magnetic field analysis to obtain the AL-value current properties of a choke coil.
-
[JAC084] Electromagnetic Forming Analysis of a Tube
This Application Note explains how to obtain the Lorentz force density distribution generated in a tube when current is run through a coil.
-
[JAC100] Surface Heating Analysis of a Steel Plate
This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …
-
[JAC157] Analysis of Eddy Currents in an IPM Motor Using the Gap Flux Boundary
This Application Note explains how to use the gap flux boundary condition to evaluate the eddy current loss in the magnet by changing the number of magnet divisions. This will mak…
-
[JAC086] Power Transmission Analysis of a Wireless Power Transfer System
This Application Note presents how to obtain the power transmission efficiency when the feeder wire’s position is moved in both the horizontal and vertical directions from a refer…
-
[JAC085] High-Frequency Induction Heating Analysis of a Constant Velocity Joint
This Application Note shows how to run an analysis of the elevated temperature process by using the geometry of a coil to evaluate whether or not the target temperature conditions…
-
[JAC083] Magnetic Shielding Analysis of an Induction Furnace
This Application Note displays magnetic flux density distribution to evaluate the differences in magnetic flux with and without yokes.
-
[JAC052] Inductance Analysis of a Sheet Coil Transformer
This Application Note explains how to obtain the self-inductance and leakage inductance of a sheet coil transformer.
-
[JAC046] Sensitivity Analysis of the Magnetization Pattern of an SPM Motor
This Application Note presents the use of a magnetic field analysis to obtain the surface flux density for radial pattern, parallel anisotropic pattern, and polar anisotropy patte…
-
[JAC048] High-Frequency Induction Heating Analysis of a Printer Roller
This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…
-
[JAC047] High-Frequency Induction Heating Analysis of a Crankshaft
This Application Note shows an example of an evaluation performed by creating a numerical analysis model, analyzing the elevated temperature process, and seeing whether or not the…
-
[JAC049] High-Frequency Induction Heating Analysis of a Steel Sheet
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…
-
[JAC050] High-Frequency Induction Heating Analysis of a Steel Wire (Translational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…
