Eddy Current Analysis

Sort condition
Newest first
Oldest first
Views
  1. 14 – Inductance Analysis of a Bus Bar

    This note presents a case study on the current distribution and the frequency versus inductance characteristic of the bus bar.

  2. 22 – Analysis of the Eddy Current in the Magnet of an IPM Motor

    This Application Note presents the use of a magnetic field analysis in a state of operation to obtain variations in magnet eddy current losses according to the number of divisions…

  3. 45 – High-Frequency Induction Heating Analysis of an IH Cooking Heater

    This Application Note shows how to obtain the magnetic flux density surrounding an IH cooking heater that uses high frequency induction heating and the temperature distribution of…

  4. 13 – High-Frequency Induction Heating Analysis of a Shaft

    This Application Note explains how to create a numerical analysis model and analyze the elevated temperature process in order to use the coil geometry and current conditions (powe…

  5. 51 – High-Frequency Induction Heating Analysis of a Gear

    This Application Note shows how to create a numerical analysis model when obtaining the optimum coil geometry and current conditions (power supply frequency and current value), an…

  6. 85 – High-Frequency Induction Heating Analysis of a Constant Velocity Joint

    This Application Note shows how to run an analysis of the elevated temperature process by using the geometry of a coil to evaluate whether or not the target temperature conditions…

  7. 86 – Power Transmission Analysis of a Wireless Power Transfer System

    This Application Note presents how to obtain the power transmission efficiency when the feeder wire’s position is moved in both the horizontal and vertical directions from a refer…

  8. 50 – High-Frequency Induction Heating Analysis of a Steel Wire (Translational Induction Hardening)

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…

  9. 49 – High-Frequency Induction Heating Analysis of a Steel Sheet

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…

  10. 47 – High-Frequency Induction Heating Analysis of a Crankshaft

    This Application Note shows an example of an evaluation performed by creating a numerical analysis model, analyzing the elevated temperature process, and seeing whether or not the…

  11. 83 – Magnetic Shielding Analysis of an Induction Furnace

    This Application Note displays magnetic flux density distribution to evaluate the differences in magnetic flux with and without yokes.

  12. 48 – High-Frequency Induction Heating Analysis of a Printer Roller

    This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…

  13. 100 – Surface Heating Analysis of a Steel Plate

    This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …

  14. 84 – Electromagnetic Forming Analysis of a Tube

    This Application Note explains how to obtain the Lorentz force density distribution generated in a tube when current is run through a coil.

  15. 101 – AL-Value Current Characteristic Analysis of a Choke Coil

    This note presents the use of a magnetic field analysis to obtain the AL-value current properties of a choke coil.

  16. 46 – Sensitivity Analysis of the Magnetization Pattern of an SMP Motor

    This Application Note presents the use of a magnetic field analysis to obtain the surface flux density for radial pattern, parallel anisotropic pattern, and polar anisotropy patte…

Search Filter

  • All Categories