[JAC087] Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting

This document will compare the results of iron loss accounting for only the size of stress, and iron loss accounting for changes in magnetic flux density over time for each princi…

• Applications: IPM Motor and Motor
• Module: DP, DS, and LS
• Physical Phenomena: Magnetic Field and Structural
• Technical Themes: Multiphysics

[JAC082] Analysis of a Synchronous Reluctance Motor

DATAFile nameSize (KB)Application NoteJAC082SynRM-e.zip763Model DataJMAG-Designer 12.0JAC082SynRM-d.zip1,584Case

[JAC112] Starting Thrust Force Analysis of a Linear Induction Motor

DownloadVersionSize (KB)Application NoteJAC112LIM-StartingThrust-e.zip333Model DataJMAG-Designer 12.0JAC112LIM-StartingThrust-d.zip312Case

[JAC117] Iron Loss Analysis of a Transformer

This Application Note presents how to obtain the iron loss and the ratio of hysteresis loss and joule loss within that iron loss for a three-phase transformer.

• Applications: Transformer / Reactor
• Module: FQ and LS
• Physical Phenomena: Magnetic Field

[JAC157] Analysis of Eddy Currents in an IPM Motor Using the Gap Flux Boundary

DATAFile nameSize (KB)Application NoteJAC157IPM-MagnetLossUsingGapFluxBoundary-e.zip1,252Model DataJMAG-Designer 13.1JAC157IPM-MagnetLossUsingGapFluxBoundary-d.zip514Case

[JAC070] Analysis of Impedance-Frequency Characteristics of a Cable

DATAFile nameSize (KB)Application NoteJAC070CABLE-e.zip567Model DataJMAG-Designer 12.0JAC070CABLE-d.zip1,256Case

[JAC108] Centrifugal Force Rupture Analysis of a Ring Magnet

DATAFile nameSize (KB)Application NoteJAC108MAGNET-CFDestruction-e.zip592Model DataJMAG-Designer 12.0JAC108MAGNET-CFDestruction-d.zip102Case

[JAC106] Iron Loss Analysis of a Brush Motor

This note presents how to obtain the iron loss in the stator core and rotor core of a brush motor.

• Applications: Brush Motor / Universal Motor and Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field

[JAC111] Starting Performance Analysis of a Universal Motor

DATAFile nameSize (KB)Application NoteJAC111UNIVERSAL-StartingPerformance-e.zip544Model DataJMAG-Designer 14.1JAC111UNIVERSAL-StartingPerformance-d.zip593Case

[JAC159] Sensitivity Analysis of Dimensional Tolerance in an SPM Motor

This Application Note presents how to assume a dimensional tolerance of ±0.4 mm for a chamfer, and find out whether changing dimensions within the tolerance range has an effect on…

• Applications: Motor and SPM Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC074] Speed Versus Torque Analysis of a Single-Phase Induction Motor

DATAFile nameSize (KB)Application NoteJAC074IM-SinglePhase-NT-e.zip478Model DataJMAG-Designer 16.1JAC074IM-SinglePhase-NT-d.zip3,243Case

[JAC131] Stray Capacitance Analysis of a Motor

DATAFile nameSize (KB)Application NoteJAC131MOTOR-StrayCapacitance-e.zip1,341Model DataJMAG-Designer 12.0JAC131MOTOR-StrayCapacitance-d.zip16,674Case

[JAC110] Loss Analysis of a Choke Coil

This Application Note shows how to obtain the iron loss and copper loss in a choke coil.

• Applications: Transformer / Reactor
• Module: FQ, LS, TRANSFORMER_TEMPLATE, and TS
• Physical Phenomena: Magnetic Field

[JAC159] Sensitivity Analysis of Dimensional Tolerance in an SPM Motor

DATAFile nameSize (KB)Application NoteJAC159SPM-DimensionalToleranceUsingMorphing-e.zip622Model DataJMAG-Designer 12.0JAC159SPM-DimensionalToleranceUsingMorphing-d.zip1,501Case

[JAC094] Analysis of Detent Torque of a PM Stepper Motor

DATAFile nameSize (KB)Application NoteJAC094PMSTEP-detent-e.zip599Model DataJMAG-Designer 12.0JAC094PMSTEP-detent-d.zip3,850Case

[JAC071] Basic Characteristic Analysis of a Motor with 2 Brushes, 6 Poles, and 19 Slots

DATAFile nameSize (KB)Application NoteJAC071BM-6p19s-e.zip821Model DataJMAG-Designer 12.0JAC071BM-6p19s-d.zip2,087Case