DP
Transient Magnetic (2D/Axisymmetric)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC162] Drive Simulation of an SR Motor using a Control Simulator and JMAG-RT
In this Application Note, after using JMAG-RT to obtain an SR motor’s torque and inductance characteristics, the JMAG-RT model is imported into a circuit/control simulator, voltag…
-
[JAC239] Fault Analysis in an IPM Motor
In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…
-
[JAC243] Voice Coil Motor Control Simulation Using a Control Simulator and JMAG-RT
In this example, circuit simulation is performed to control the position of a mover by loading a JMAG-RT model for a voice coil motor into a control/circuit simulator.
-
[JAC285] Integrated Magnetization Analysis of an SPM Motor by Magnetizing Multiple Times
In this example, the magnets are magnetized more than once with the rotor at different positions to evaluate the magnetization distribution in the magnets while also accounting fo…
-
[JAC269] Creating Three-Phase Induction Motor Efficiency Maps Accounting for Harmonics
In this example, efficiency maps are created for a three-phase induction motor accounting for PWM carrier and slot harmonics. These are compared with efficiency maps when harmonic…
-
[JAC017] Inductance Analysis of an IPM Motor
This Application Note explains how to obtain the current phase angle characteristics of a dq axis inductance that accounts for magnetic saturation and flux leakage in an IPM motor.
-
[JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation
In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…
-
[JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motor
In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…
-
[JAC268] SPM Motor Teeth Geometry Topology Optimization
In this example, the on / off method is used to search for stator teeth geometry that maximizes average torque and minimizes torque ripple with the entire areas of stator teeth ti…
-
[JAC107] Current voltage characteristics analysis of flyback converters
In this example, this case study obtains the current waveform of the primary / secondary winding and the core magnetic flux density distribution, current density distribution insi…
-
[JAC192] Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization
In this example. we will discuss the steps to investigate the effect on responsiveness caused by residual magnetization generated in the magnetic materials, and look at case examp…
-
[JAC115] Eccentricity Analysis of an SPM Motor
This Application Note presents how to evaluate the cogging torque waveform and effects on the electromagnetic force acting on the stator in an SPM motor with and without eccentric…
-
[JAC240] NT Characteristics Analysis of an IPM Motor Using PAM Drive
In this example, an example of evaluating the performance of an IPM with PAM operation is presented.
-
[JAC234] Vibration Characteristics Analysis of an Induction Motor
In this example, electromagnetic force generated in the induction motor stator core is obtained, and an example of evaluating sound pressure by linking it with the eigenmode of th…
-
[JAC264] Creating 6-Phase IPM Motor Efficiency Maps
In this example, the efficiency map of a 6-phase IPM motor is created with loss ratios at each operating point also evaluated.
-
[JAC210] Torque Decoupling of In-out Magnet Coupling
This document, presents an analysis for finding holding torque and an analysis for transient response during torque decoupling.
