DP
Transient Magnetic (2D/Axisymmetric)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC159] Sensitivity Analysis of Dimensional Tolerance in an SPM Motor
This Application Note presents how to assume a dimensional tolerance of ±0.4 mm for a chamfer, and find out whether changing dimensions within the tolerance range has an effect on…
-
[JAC062] Attractive Force Analysis of a Solenoid Valve
This Application Note obtains the attraction force at each position of the movable core.
-
[JAC058] Efficiency Analysis of an IPM Motor
This Application Note presents the use of magnetic field analysis to obtain the efficiency of an IPM motor in each current phase with a rotation speed of 1800 rpm and the current …
-
[JAC056] Torque Characteristics Analysis of a Self Starting Type Permanent Magnet Motor
This Application Note shows how to obtain the current density distribution and slip versus torque curve.
-
[JAC055] Integrated Magnetization Analysis of an IPM Motor
This Application Note explains how to determine the changes that occur in a magnetizing field if the making current is changed during magnetization, as well as how to obtain the i…
-
[JAC068] Speed Versus Torque Characteristic Analysis of a Three-Phase Induction Motor
This Application Note explains an analysis that confirms the Speed-Torque curve and current density distribution of an induction motor.
-
[JAC061] Current Distribution Analysis of a Choke Coil
This Application Note explains a case example that obtains the current distribution in a choke coil.
-
[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN -Direct Link-
In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.
-
[JAC210] Torque Decoupling of In-out Magnet Coupling
In this example, an analysis for finding holding torque and an analysis for transient response during torque decoupling.
-
[JAC107] Current voltage characteristics analysis of flyback converters
In this example, this case study obtains the current waveform of the primary / secondary winding and the core magnetic flux density distribution, current density distribution insi…
-
[JAC165] Creating IPM Motor Efficiency Maps
In this example, an efficiency map of an IPM motor is created and the loss ratios at each operating point are evaluated.
-
[JAC148] Loss Analysis of a Power Transformer (Flyback Converter)
A magnetic field analysis simulation based on the finite element method (FEM) can precisely evaluate the complex loss distributions of the coil and core, so it is optimal for an a…
-
[JAC114] Vibration Analysis of an Outer Rotor Motor
This note presents the use of a magnetic field analysis and structural analysis to obtain the sound pressure caused by electromagnetic vibrations in an outer rotor motor with hole…
-
[JAC046] Sensitivity Analysis of the Magnetization Pattern of an SPM Motor
This Application Note presents the use of a magnetic field analysis to obtain the surface flux density for radial pattern, parallel anisotropic pattern, and polar anisotropy patte…
-
[JAC091] Iron Loss Analysis of an IPM Motor Including the Effects of Press Fitting Stress
This Application Note presents modeling the press fitting of a core and frame with the Press Fit condition and then obtaining the iron loss density of an IPM motor with and withou…
-
[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor
In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.
