Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC194] Analysis of High-Speed Rotation Motors Accounting for Eddy Current
Here we discuss the steps for accounting for eddy current loss occurring in the magnetic steel sheets during a magnetic field analysis, and then analyze the effects on torque.
-
[JAC191] Torque Analysis of Three-Phase Induction Motors Accounting for the Skew Using the Multi-slice Method
In this document, the multi-slice method is used to compare torque waveforms of a cage three-phase induction motor with and without skew, and is then used to verify the effects of…
-
[JAC193] Calculation of Equivalent Circuit Parameters of Single-Phase Induction Motors
In this document, we will be obtaining the secondary resistance, leakage inductance and excitation inductance of main winding of capacitor-start single-phase induction motor that …
-
[JAC189] Response Characteristics Analysis of Injectors Accounting for Collision
For this case, direct current voltage is applied to the solenoid type injector and the response characteristics is obtained after accounting for the effect of the collision and ed…
-
[JAC188] Thermal Demagnetization Analysis of IPM Motors Accounting for Coercive Force Distribution of Magnets
This example presents whether or not the demagnetization region can be smaller by assigning distribution to the coercive force of permanent magnets.
-
[JAC186] Gear Induction Hardening Analysis Using Two Frequencies
In this material, the validity of coil geometry used for quenching is evaluated by heating the gear top and bottom at high and low frequencies, respectively, to confirm uniform te…
-
[JAC185] Analysis of Stray Loss in a Power Transformer
This note obtains loss distribution for each component in drive condition and checks local overheating.
-
[JAC184] Reactor Sound Pressure Analysis taking Magnetostriction into Account
These notes will conduct an analysis of changed vibratory force and show a case study of confirming the impact magnetostriction has on vibration noise.
-
[JAC183] Agitation Force Analysis of an Induction Furnace
This analysis will evaluate the size of Lorentz force required to agitate and where this is generated.
-
[JAC180] Analysis of SR Motor Dynamic Characteristics
This example presents how to carry out an analysis with different switch timings to evaluate torque and current in SR motors.
-
[JAC179] Analysis of SR Motor Static Characteristics
This example presents an evaluation for each rotor position of the effect on flux linkage (shown as I-Psi characteristics below) when excitation current is changed.
-
[JAC178] Analysis of SR Motor I-Psi Characteristics
This example presents an evaluation of flux linkage, inductance and torque for each rotor position when the flowing current value is changed.
-
[JAC177] Torque Characteristic Analysis of a Three Phase Induction Motor
This Application Note explains how to obtain the torque characteristics in an induction motor when the current amplitude has been changed in a specific slip.
-
[JAC173] Basic Characteristic Analysis of an IPM Motor
This Application Note demonstrates an analysis in which an IPM motor's cogging torque, torque, magnetic flux density distribution, and iron loss in the stator core are obtained.
-
[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…
-
[JAC163] Torque-Current Curve Analysis of an SPM Motor
This Application Note presents how to obtain the torque-current curve as a basic property of one type of permanent magnet synchronous motor, the surface permanent magnet synchrono…
