JMAG-Designer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC224] Wireless Power Transfer Device Stray Loss Analysis
In this example, an example is presented investigating by using electromagnetic field analysis whether stray loss can be suppressed using an aluminum shield.
-
[JAC268] SPM Motor Teeth Geometry Topology Optimization
In this example, the on / off method is used to search for stator teeth geometry that maximizes average torque and minimizes torque ripple with the entire areas of stator teeth ti…
-
[JAC165] Creating IPM Motor Efficiency Maps
In this example, an efficiency map of an IPM motor is created and the loss ratios at each operating point are evaluated.
-
[JAC209] Magnetic Measurement Analysis Accounting for Eddy Currents
This document introduces an analysis model is created based on the excitation current method, and the differences in magnetic properties obtained when the frequency is changed are…
-
[JAC107] Current voltage characteristics analysis of flyback converters
In this example, this case study obtains the current waveform of the primary / secondary winding and the core magnetic flux density distribution, current density distribution insi…
-
[JFT097] Optimization Execution Using Material Characteristics as Design Variables
In this document, how to perform optimization with material characteristics used as design variables is presented.
-
[JAC192] Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization
In this example. we will discuss the steps to investigate the effect on responsiveness caused by residual magnetization generated in the magnetic materials, and look at case examp…
-
[JAC008] Analysis of an Axial Gap Motor
In this example, how to use JMAG's 3D magnetic field analysis to carry out a load analysis of an axial gap motor, and then obtain the Torque-Speed curve and the Torque-Current cur…
-
[JAC072] Analysis of Attractive Force between Steel Plates and a Magnet
This Application Note explains how to obtain the magnetic flux density distribution and attractive force generated between a steel plate and a magnet.
-
[JAC115] Eccentricity Analysis of an SPM Motor
This Application Note presents how to evaluate the cogging torque waveform and effects on the electromagnetic force acting on the stator in an SPM motor with and without eccentric…
-
[JAC217] Creating Efficiency Maps for 3-Phase Induction Motors
In this example, the use of JMAG-RT Viewer to create efficiency maps for three-phase induction motors when drive temperatures change.
-
[JFT139] Coil Modeling for Axial Gap Type Rotating Machines Using Coil Template and Winding Editor
This document explains how to create coil shapes and set conditions for an axial gap type motor.
-
[JFT139] Coil Modeling for Axial Gap Type Rotating Machines Using Coil Template and Winding Editor
DownloadVersionSize (KB)Guide (PDF) -1,401Sample Data JMAG-Designer 20.2173Case
-
Togami Electric Mfg. Co., Ltd.
Building on tradition, the Togami Electric Mfg. Co., Ltd., a manufacturer of power distribution and control equipment, makes use of their creativity and ingenuity to evolve with s…
-
[JAC240] NT Characteristics Analysis of an IPM Motor Using PAM Drive
In this example, an example of evaluating the performance of an IPM with PAM operation is presented.
-
[JAC234] Vibration Characteristics Analysis of an Induction Motor
In this example, electromagnetic force generated in the induction motor stator core is obtained, and an example of evaluating sound pressure by linking it with the eigenmode of th…
