Induction Heating

Sort condition
Newest first
Oldest first
Views
  1. 45 – High-Frequency Induction Heating Analysis of an IH Cooking Heater

    This Application Note shows how to obtain the magnetic flux density surrounding an IH cooking heater that uses high frequency induction heating and the temperature distribution of…

  2. 13 – High-Frequency Induction Heating Analysis of a Shaft

    This Application Note explains how to create a numerical analysis model and analyze the elevated temperature process in order to use the coil geometry and current conditions (powe…

  3. 51 – High-Frequency Induction Heating Analysis of a Gear

    This Application Note shows how to create a numerical analysis model when obtaining the optimum coil geometry and current conditions (power supply frequency and current value), an…

  4. 85 – High-Frequency Induction Heating Analysis of a Constant Velocity Joint

    This Application Note shows how to run an analysis of the elevated temperature process by using the geometry of a coil to evaluate whether or not the target temperature conditions…

  5. 50 – High-Frequency Induction Heating Analysis of a Steel Wire (Translational Induction Hardening)

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…

  6. 49 – High-Frequency Induction Heating Analysis of a Steel Sheet

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…

  7. 47 – High-Frequency Induction Heating Analysis of a Crankshaft

    This Application Note shows an example of an evaluation performed by creating a numerical analysis model, analyzing the elevated temperature process, and seeing whether or not the…

  8. 83 – Magnetic Shielding Analysis of an Induction Furnace

    This Application Note displays magnetic flux density distribution to evaluate the differences in magnetic flux with and without yokes.

  9. 48 – High-Frequency Induction Heating Analysis of a Printer Roller

    This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…

  10. 100 – Surface Heating Analysis of a Steel Plate

    This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …

  11. 172 – High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…

  12. 183 – Agitation Force Analysis of an Induction Furnace

    This analysis will evaluate the size of Lorentz force required to agitate and where this is generated.

  13. 186 – Gear Induction Hardening Analysis Using Two Frequencies

    In this material, the validity of coil geometry used for quenching is evaluated by heating the gear top and bottom at high and low frequencies, respectively, to confirm uniform te…

  14. 233 – Induction Heating Coil Optimization

    In this example, an example of using an optimization function to design a coil to use for induction hardening a gear is presented.

  15. 220 – Analysis of the High-Frequency Induction Hardening and Cooling of a Gear

    In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.

  16. 218 – High-Frequency Induction Hardening Analysis Accounting for Deformation

    In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.

Search Filter

  • All Categories