Search results：Iron Loss
- Sort condition
- Newest first
- Oldest first
-
[JAC265] Creating Synchronous Reluctance Motor Efficiency Maps
In this example, the efficiency map of a synchronous reluctance motor is created with loss ratios at each operating point also evaluated.
-
[JAC276] Six-Phase IPM Motor Harmonic Iron Loss Analysis
In this example, confirming the effects of carrier harmonics on the iron loss of a six-phase IPM motor are explained here.
-
[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor
In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.
-
[JAC260] Creating Axial Gap-Type Motor Efficiency Maps
In this example, the motor performance of axial gap-type motors with changes made to the flatness ratios.
-
[JAC275] IPM Motor Iron Loss Analysis Accounting for the Effect of Residual Strain
In this document, an analysis of an IPM motor accounting for the residual strain that occurs as a result of punching processes, and evaluates the effect on torque, magnetic flux d…
-
[JAC022] Analysis of the Eddy Current in the Magnet of an IPM Motor
This Application Note presents the use of a magnetic field analysis in a state of operation to obtain variations in magnet eddy current losses according to the number of divisions…
-
[JAC200] Iron Loss Analysis of IPM Motor using Hysteresis Model
In this example, a hysteresis model accounting for minor loops of the direct current bias magnetism and the lamination analysis function accounting for eddy current distribution i…
-
[JAC201] Iron Loss Analysis of an SR Motor
This example, to accurately capture iron loss that occurs in the SR motor, we will introduce hysteresis loss accounting for the hysteresis loop of the materials and the iron loss …
-
[JAC142] Press Fit Analysis of a Divided Core
This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…
-
[JAC181] Analysis of SR Motor Drive Characteristics
This example presents how to confirm drive characteristics such as torque, loss, and efficiency in a motor when its switch timing changes for each rotation speed.
-
[JAC202] Core Stray Loss Analysis of Power Transformer
This document introduces runs analysis by modeling the short-circuit test that is conducted when evaluating stray loss and obtains stray loss distribution in the core close to the…
-
[JAC167] Iron Loss Analysis of a Three Phase Induction Motor
This Application Note presents an example of how to find the iron loss in the stator core and rotor core at a rotation speed of 3,300 r/min.
-
[JAC238] Hysteresis Loss Analysis in a Reactor with DC Bias
In this example, we will observe the difference between the hysteresis losses calculation method loop count and the play model for the model that is subjected to a DC bias filed o…
-
[JAC237] AC Loss Analysis of an IPM Motor
In this example, we introduce the case study that evaluates AC losses in coils of an IPM motor.
-
[JAC212] AC Loss Analysis of a Claw Pole Alternator
In this example, we introduce the case study that evaluates AC losses in coils of claw pole alternator.
-
[JAC229] Analysis of the Effect of PWM on the Iron Loss of an Induction Motor
In this example, we introduce a case study to obtain the iron losses of the induction motor that accounts for the PWM input.
