[JAC268] SPM Motor Teeth Geometry Topology Optimization

DATAFile nameSize (KB)Application Note JAC268SPM-TopologyOptNGnet-e.zip723Model DataJMAG-Designer 20.2JAC268SPM-TopologyOptNGnet-d.zip681Case

[JAC209] Magnetic Measurement Analysis Accounting for Eddy Currents

DATAFile nameSize (KB)Application NoteJAC209PPT-Measure-e.zip733Model DataJMAG-Designer 13.1JAC209PPT-Measure-d.zip872Case

[JAC209] Magnetic Measurement Analysis Accounting for Eddy Currents

This document introduces an analysis model is created based on the excitation current method, and the differences in magnetic properties obtained when the frequency is changed are…

• Applications: Physical Property Testing
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC165] Creating IPM Motor Efficiency Maps

In this example, an efficiency map of an IPM motor is created and the loss ratios at each operating point are evaluated.

• Applications: IPM Motor and Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field
• Technical Themes: Efficiency map

[JAC107] Current voltage characteristics analysis of flyback converters

In this example, this case study obtains the current waveform of the primary / secondary winding and the core magnetic flux density distribution, current density distribution insi…

• Applications: Transformer / Reactor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC107] Current voltage characteristics analysis of flyback converters

DATAFile nameSize (KB)Application NoteJAC107FLYBACK-Current-e.zip589Model DataJMAG-Designer 20.0JAC107FLYBACK-Current-d.zip971Case

[JAC192] Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization

In this example. we will discuss the steps to investigate the effect on responsiveness caused by residual magnetization generated in the magnetic materials, and look at case examp…

• Applications: Linear Solenoid / Linear Actuator
• Module: DP
• Physical Phenomena: Magnetic Field and Material

[JAC233] Induction Heating Coil Optimization

DATAFile nameSize (KB)Application NoteJAC233IH-CoilOptimization-e.zip1,151Model DataJMAG-Designer 20.0JAC233IH-CoilOptimization-d.zip725Case

[JAC192] Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization

DATAFile nameSize (KB)Application NoteJAC192INJECTOR-ResidualMagnetization-e.zip566Model DataJMAG-Designer 17.1JAC192INJECTOR-ResidualMagnetization-d.zip246Case

[JAC233] Induction Heating Coil Optimization

In this example, an example of using an optimization function to design a coil to use for induction hardening a gear is presented.

• Applications: Induction Heating
• Module: FQ and HT
• Physical Phenomena: Magnetic Field and Thermal
• Technical Themes: Design Exploration / Optimization and Multiphysics

[JAC008] Analysis of an Axial Gap Motor

In this example, how to use JMAG's 3D magnetic field analysis to carry out a load analysis of an axial gap motor, and then obtain the Torque-Speed curve and the Torque-Current cur…

• Applications: Axial Gap Type Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC115] Eccentricity Analysis of an SPM Motor

DATAFile nameSize (KB)Application NoteJAC115SPM-Offcenter-e.zip919Model DataJMAG-Designer 20.1JAC115SPM-Offcenter-d.zip1,575Case

[JAC072] Analysis of Attractive Force between Steel Plates and a Magnet

DATAFile nameSize (KB)Application NoteJAC072MAGNET-e.zip500Model DataJMAG-Designer 12.0JAC072MAGNET-d.zip4,360Case

[JAC072] Analysis of Attractive Force between Steel Plates and a Magnet

This Application Note explains how to obtain the magnetic flux density distribution and attractive force generated between a steel plate and a magnet.

• Applications: Magnet
• Module: ST
• Physical Phenomena: Magnetic Field

[JAC115] Eccentricity Analysis of an SPM Motor

This Application Note presents how to evaluate the cogging torque waveform and effects on the electromagnetic force acting on the stator in an SPM motor with and without eccentric…

• Applications: Motor and SPM Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC217] Creating Efficiency Maps for 3-Phase Induction Motors

In this example, the use of JMAG-RT Viewer to create efficiency maps for three-phase induction motors when drive temperatures change.

• Applications: Induction Motor and Motor
• Module: EFFICIENCYMAP, FQ, and LS
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: Efficiency map