Search results

[JAC277] Vibration Analysis of Axial Gap-Type Motor

DATAFile nameSize (KB)Application NoteJAC277AXIAL-Vibration-e.zip1,717Model DataJMAG-Designer 19.1JAC277AXIAL-Vibration-d.zip18,995Case

[JAC275] IPM Motor Iron Loss Analysis Accounting for the Effect of Residual Strain

DATAFile nameSize (KB)Model DataJMAG-Designer 19.1JAC275IPM-ResidualStrain-d.zip1,111Case

[JAC275] IPM Motor Iron Loss Analysis Accounting for the Effect of Residual Strain

In this document, an analysis of an IPM motor accounting for the residual strain that occurs as a result of punching processes, and evaluates the effect on torque, magnetic flux d…

• Applications: IPM Motor and Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC231] Vector Control Simulation of a Synchronous Reluctance Motor

In this example, circuit simulation is carried out simulating the control of current and speed by loading a JMAG-RT model for a SynRM into a control/circuit simulator. In addition…

• Applications: Motor and Synchronous Reluctance Motor
• Module: DP and RT
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC231] Vector Control Simulation of a Synchronous Reluctance Motor

DATAFile nameSize (KB)Model DataJMAG-Designer 20.0JAC231SynRM-RT-d.zip1,477Case

[JAC230] 6-Phase SPM Motor Inverter Fault Simulation

In this example, a JMAG-RT model of a 6-phase SPM is loaded into a control/circuit simulator, and circuit simulation for an inverter failure is carried out.

• Applications: Motor and SPM Motor
• Module: DP and RT
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC230] 6-Phase SPM Motor Inverter Fault Simulation

DATAFile nameSize (KB)Model DataJMAG-Designer 19.1JAC230SPM-RT-MultiPhase-d.zip19,032Case

[JAC274] SPM Motor Thermal Demagnetization Analysis Using Bonded NdFeB Magnets

DATAFile nameSize (KB)Model DataJMAG-Designer 20.0JAC274SPM-ThermalDemag-d.zip456Case

[JAC073] Analysis of the Capacitance of a Parallel Plate Capacitor

This Application Note explains how to use JMAG to calculate the capacitance when the dielectric material is air and when it is a high permittivity material, while obtaining the am…

• Applications: Condenser
• Module: EL
• Physical Phenomena: Electric Field

[JAC073] Analysis of the Capacitance of a Parallel Plate Capacitor

DATAFile nameSize (KB)Application NoteJAC073CONDENSER-Capacitance-e.zip730Model DataJMAG-Designer 20.0JAC073CONDENSER-Capacitance-d.zip16,210Case

[JAC274] SPM Motor Thermal Demagnetization Analysis Using Bonded NdFeB Magnets

In this example, an SPM motor thermal demagnetization analysis is performed using bonded NdFeB magnets. Both the influence on torque waveforms when changing rotor magnet temperatu…

• Applications: Motor and SPM Motor
• Module: DP
• Physical Phenomena: Magnetic Field and Material
• Technical Themes: Multiphysics

[JAC272] Thrust Analysis of Linear Actuator with a Curved Section

In this example, the thrust characteristics of a linear actuator with a curved section are obtained via analysis, and thrust at the transition from a linear motion to a curved mot…

• Applications: Linear Motor and Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC272] Thrust Analysis of Linear Actuator with a Curved Section

DATAFile nameSize (KB)Model DataJMAG-Designer 19.1JAC272LINEAR-ArbitraryMotion-d.zip1,799Case

[JAC271] Axial Gap Type Motor AC Copper Loss Analysis

DATAFile nameSize (KB)Model DataJMAG-Designer 19.1JAC271AXIAL-ACLoss-d.zip72,309Case

[JAC271] Axial Gap Type Motor AC Copper Loss Analysis

In this example, the AC copper loss of an axial gap type motor using square wire is evaluated.

• Applications: Axial Gap Type Motor and Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC257] Topology Optimization of an IPM Motor

DATAFile nameSize (KB)Application NoteJAC257IPM-TopologyOptimization-e.zip1,057Model DataJMAG-Designer 24.1JAC257IPM-TopologyOptimization-d.zip984Case