Search results

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC230] 6-Phase SPM Motor Inverter Fault Simulation

    DATAFile nameSize (KB)Model DataJMAG-Designer 19.1JAC230SPM-RT-MultiPhase-d.zip19,032Case

    • [JAC274] SPM Motor Thermal Demagnetization Analysis Using Bonded NdFeB Magnets

      DATAFile nameSize (KB)Model DataJMAG-Designer 20.0JAC274SPM-ThermalDemag-d.zip456Case

      • [JAC073] Analysis of the Capacitance of a Parallel Plate Capacitor

        This Application Note explains how to use JMAG to calculate the capacitance when the dielectric material is air and when it is a high permittivity material, while obtaining the am…

      • [JAC073] Analysis of the Capacitance of a Parallel Plate Capacitor

        DATAFile nameSize (KB)Application NoteJAC073CONDENSER-Capacitance-e.zip730Model DataJMAG-Designer 20.0JAC073CONDENSER-Capacitance-d.zip16,210Case

        • [JAC274] SPM Motor Thermal Demagnetization Analysis Using Bonded NdFeB Magnets

          In this example, an SPM motor thermal demagnetization analysis is performed using bonded NdFeB magnets. Both the influence on torque waveforms when changing rotor magnet temperatu…

        • [JAC272] Thrust Analysis of Linear Actuator with a Curved Section

          In this example, the thrust characteristics of a linear actuator with a curved section are obtained via analysis, and thrust at the transition from a linear motion to a curved mot…

        • [JAC272] Thrust Analysis of Linear Actuator with a Curved Section

          DATAFile nameSize (KB)Model DataJMAG-Designer 19.1JAC272LINEAR-ArbitraryMotion-d.zip1,799Case

          • [JAC271] Axial Gap Type Motor AC Copper Loss Analysis

            DATAFile nameSize (KB)Model DataJMAG-Designer 19.1JAC271AXIAL-ACLoss-d.zip72,309Case

            • [JAC271] Axial Gap Type Motor AC Copper Loss Analysis

              In this example, the AC copper loss of an axial gap type motor using square wire is evaluated.

            • [JAC257] Topology Optimization of an IPM Motor

              DATAFile nameSize (KB)Application NoteJAC257IPM-TopologyOptimization-e.zip1,057Model DataJMAG-Designer 24.1JAC257IPM-TopologyOptimization-d.zip984Case

              • [JAC257] Topology Optimization of an IPM Motor

                This case study runs a topology optimization to minimize torque ripple and maximize average torque with the maximum stress on the rotor core and maximum radial displacement below …

              • [JAC225] Induced Voltage Analysis on Memory Motors Using Variable Magnets

                In this example, the change in motor characteristics are checked as the memory motor variable magnet magnetization is changed using the three-phase coil current. One example of mo…

              • [JAC259] Automatically Searching for Current Phase that Obtains Maximum Torque and Evaluating Torque Characteristics

                DATAFile nameSize (KB)Application NoteJAC259TorqueCurrentPhaseSearchCharacteristics-e.zip886Model DataJMAG-Designer 19.0JAC259TorqueCurrentPhaseSearchCharacteristics-d.zip1,027Case

                • [JAC259] Automatically Searching for Current Phase that Obtains Maximum Torque and Evaluating Torque Characteristics

                  In this example, the current phase that maximizes the torque is searched for each of three rotor geometries. The motor average currents and torque ripples are evaluated using the …

                • [JAC258] Magnetic Shield Geometry Optimization

                  DATAFile nameSize (KB)Model DataJMAG-Designer 19.0JAC258SHIELD-Optimization-d.zip440Case

                  • [JAC258] Magnetic Shield Geometry Optimization

                    In this example, a case study in which the geometry of a magnetic shield is optimized using topology optimization that uses a sensitivity analysis (density method) is presented. D…

                  Search Filter

                  • All Categories

                  JMAG-Express Online
                  An engineer's diary