TR
Transient Magnetic (3D)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC277] Vibration Analysis of Axial Gap-Type Motor
In this example, phenomena confirmed in axial gap-type motors that occur at maximum sound pressure level, from an electromagnetic excitation force and eigen mode perspective.
-
[JAC272] Thrust Analysis of Linear Actuator with a Curved Section
In this example, the thrust characteristics of a linear actuator with a curved section are obtained via analysis, and thrust at the transition from a linear motion to a curved mot…
-
[JAC271] Axial Gap Type Motor AC Copper Loss Analysis
In this example, the AC copper loss of an axial gap type motor using square wire is evaluated.
-
[JAC022] Analysis of the Eddy Current in the Magnet of an IPM Motor
This Application Note presents the use of a magnetic field analysis in a state of operation to obtain variations in magnet eddy current losses according to the number of divisions…
-
[JAC064] Thrust Force Analysis of a Coreless Linear Motor
In this example, explains how to obtain the thrust variations in a coreless linear motor when it is driven with a three-phase alternating current.
-
[JAC007] Analysis of a Spindle Motor
In this example, how the Speed-Torque curve, the Torque-Current curve and the magnetic flux density distribution of a spindle motor can be obtained.
-
[JAC255] Evaluating the N-T Curve of an IPM motor Using 3D Correction
In this example, obtains N-T curves using the correction function.
-
[JAC195] Torque characteristics analysis of three-phase induction motors using 3D correction function
This document introduces introduces a case study which obtains inductance correction values, and then obtains N-T characteristics (revolution speed-torque characteristics) using t…
-
[JAC237] AC Loss Analysis of an IPM Motor
In this example, we introduce the case study that evaluates AC losses in coils of an IPM motor.
-
[JAC212] AC Loss Analysis of a Claw Pole Alternator
In this example, we introduce the case study that evaluates AC losses in coils of claw pole alternator.
-
[JAC184] Reactor Sound Pressure Analysis taking Magnetostriction into Account
These notes will conduct an analysis of changed vibratory force and show a case study of confirming the impact magnetostriction has on vibration noise.
-
[JAC116] Operating Time Analysis of an Injector by Evaluating the Reduction in Eddy Currents
This Application Note explains how to apply direct current voltage to a solenoid injector and obtain its response characteristics by accounting for effects from eddy currents. The…
-
[JAC109] Operating Time Analysis of an Electromagnetic Relay Accounting for Eddy Currents
This Application Note presents the use of the motion equation function to evaluate the operating time of an electromagnetic relay with DC voltage drive. Eddy currents generated in…
-
[JAC140] Analysis of Electromagnetic Repulsion Produced in Small Contact Bridges
This Application Note presents the use of a magnetic field analysis to obtain the electromagnetic repulsion when a switch is closed, creating a contact bridge.
-
[JAC089] Stiffness Torque Analysis of a PM Stepper Motor
This Application Note describes how the stiffness torque at 0.5 A of current can be calculated for a PM stepper motor.
-
[JAC094] Analysis of Detent Torque of a PM Stepper Motor
This Application Note describes how the detent torque can be calculated for a PM stepper motor.
