Axial Gap Type Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC080] Cogging Torque Analysis of an SPM Motor with Skewed Magnetization
This Application Note presents the use of a magnetic field analysis to obtain the flux density distribution, cogging torque, and induced voltage of an SPM motor that has skewed ma…
-
[JAC087] Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting
This document will compare the results of iron loss accounting for only the size of stress, and iron loss accounting for changes in magnetic flux density over time for each princi…
-
[JAC159] Sensitivity Analysis of Dimensional Tolerance in an SPM Motor
This Application Note presents how to assume a dimensional tolerance of ±0.4 mm for a chamfer, and find out whether changing dimensions within the tolerance range has an effect on…
-
[JAC058] Efficiency Analysis of an IPM Motor
This Application Note presents the use of magnetic field analysis to obtain the efficiency of an IPM motor in each current phase with a rotation speed of 1800 rpm and the current …
-
[JAC056] Torque Characteristics Analysis of a Self Starting Type Permanent Magnet Motor
This Application Note shows how to obtain the current density distribution and slip versus torque curve.
-
[JAC055] Integrated Magnetization Analysis of an IPM Motor
This Application Note explains how to determine the changes that occur in a magnetizing field if the making current is changed during magnetization, as well as how to obtain the i…
-
[JAC068] Speed Versus Torque Characteristic Analysis of a Three-Phase Induction Motor
This Application Note explains an analysis that confirms the Speed-Torque curve and current density distribution of an induction motor.
-
[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN -Direct Link-
In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.
-
[JAC063] Analysis of Torque Characteristics of a Cage Induction Motor
This Application Note introduces a case example that obtains the Slip-Torque curve, Torque-Current curve, Current-Voltage curve at maximum torque, and the Current-Joule Loss curve…
-
[JAC193] Calculation of Equivalent Circuit Parameters of Single-Phase Induction Motors
In this document, we will be obtaining the secondary resistance, leakage inductance and excitation inductance of main winding of capacitor-start single-phase induction motor that …
-
[JAC114] Vibration Analysis of an Outer Rotor Motor
This note presents the use of a magnetic field analysis and structural analysis to obtain the sound pressure caused by electromagnetic vibrations in an outer rotor motor with hole…
-
[JAC046] Sensitivity Analysis of the Magnetization Pattern of an SPM Motor
This Application Note presents the use of a magnetic field analysis to obtain the surface flux density for radial pattern, parallel anisotropic pattern, and polar anisotropy patte…
-
[JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor
This Application Note demonstrates a case study where the effects of a carrier harmonic against an IPM motor’s iron loss is confirmed using estimated harmonic current waveform as …
-
[JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress
This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.
-
[JAC024] Cogging Torque Analysis of an SPM Motor with a Skewed Stator
This note presents the use of magnetic field analysis to evaluate the cogging torque of an SPM motor with a skewed stator.
-
[JAC040] Cogging Torque Analysis of an SPM Motor
This Application Note presents the use of magnetic field analysis to obtain the cogging torque of an 8-pole, 9-slot SPM motor, which has relatively small period.
