MATLAB/Simulink

Sort condition
Newest first
Oldest first
Large number of views
  1. [W-MB-153] Accuracy and Speed Verification of Motor Plant Models Accounting for Spatial Harmonics

    This document uses JMAG-RT, which is a type of plant model, to show the relationship between the resolution and accuracy of each axis (mechanical angle, current amplitude, and cur…

  2. [W-MB-156] Improving Motor Plant Model Accuracy by Accounting for Harmonic Iron Loss

    Because of the acceleration of the motor and the effect of the PWM drive, it is becoming more important to account for loss in order to improve accuracy even for analysis using mo…

  3. [JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motor

    In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…

  4. [JFT147] Creating a Lookup Table Using Parametric Analysis

    This document explains how to run parametric analysis in JMAG-Designer and register it as a lookup table for MATLAB.

    • [RTML-043] SRM_01 3-phase

      Type: SRM | Max Power: 0.5(kW) | Stator(Outside Diameter): 160(mm) | Height: 75(mm) | Voltage: DC150(V) | Rotor/Mover: RM

    • [RTML-050] PMSM/IPM 3-Phases Delta

      Type: PMSM | Power: 150(W) | Stator(Outside Diameter): 112(mm) | Height: 65(mm) | Voltage/Current: DC24(V)/4(A) | Rotor/Mover: IPM

    • [RTML-049] PMSM/IPM Constant rating 75(kW) 3-phase Resolver

      Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM

    • [RTML-048] WFSM_02

      Type: WFSM | Max Power: 2(kW) | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF | Number of Phases: 6

    • [JFT133] System Loss Evaluations in System-Level Simulations

      This document describes the method to output an efficiency map / loss map obtained with JMAG and using a circuit simulation to comprehend drive cycle system loss.

    • [RTML-044] WFSM_01

      Type: WFSM | Max Power: 2(kW) | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF | Number of Phases: 3

    • [RTML-042] SynRM_01 3-phase

      Type: SynRM | Max Power: 0.01(kW) | Stator(Outside Diameter): 150(mm) | Height: 37.5(mm) | Voltage/Current: DC288(V)/5(A) | Rotor/Mover: RM | Average torque: 0.8(N·m)

    • [RTML-040] PMSM/SPM Constant rating 1(kW) 6-phase

      Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53.4(mm) | Height: 37.5(mm) | Voltage/Current: DC100(V)/10(A) | Rotor/Mover: SPM | Average torque: 4(N·m)

    • Case Study of Developing an IPM Motor Drive System with Model-Based Development (MBD) – Using JMAG-RT and HILS –

      Daisuke Mitsuoka, Shimadzu Corporation

    • Fuel Consumption Simulations for Vehicles Equipped with HUB Bearings with Motor Generator (eHUB)

      Mitsuo Kawamura, NTN Corporation

    • Analysis of Multi-Degree-of-Freedom Spherical Actuators in JMAG

      Hirotsugu Fusayasu, Panasonic Corporation

    • [JFT080] Direct Coupling between MATLAB/Simulink and JMAG

      In this document, direct coupling between MATLAB/Simulink and JMAG is presented.

    Search Filter

    • All Categories