Thermal
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…
-
[JAC186] Gear Induction Hardening Analysis Using Two Frequencies
In this material, the validity of coil geometry used for quenching is evaluated by heating the gear top and bottom at high and low frequencies, respectively, to confirm uniform te…
-
[JAC198] Bus Bar Thermal Stress Analysis
Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.
-
[JAC206] Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis
This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…
-
[L-MU-07]Multiphysics Analysis by Linking with Specialized Tools
The mapping function between models with different dimensions in a JMAG multiphysics analysis can also be used when running a coupled analysis with other tools. JMAG makes it poss…
-
[L-MU-92] JMAG/Particleworks Coupled Motor Cooling Analysis
Motor temperature control is an important issue. Due to temperature rise, demagnetization occurs in PM motor magnets leading to a loss of high efficiency.
-
[JAC249] Dielectric Heating Analysis of a High-Frequency Preheater with Parallel Plate Electrodes
In this example, a use case evaluating the influence on the temperature distribution of materials (tablets) with and without auxiliary electrodes is presented.
-
[JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear
In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.
-
Oil cooling Electric machine using multi-time scale CHT and Hybrid Multiphase
Makoto Sato, Siemens PLM software Computational Dynamics K.K.
-
A Temperature Prediction Technique of Motors by the Combination Between Harmonic Loss Simulation by JMAG-Designer and Thermal Simulation by FloTHERM.
Manabu Kawaji, Aisin Seiki Co., Ltd.
-
Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening
Yohei Awata, Denki Kogyo Co.,Ltd.
-
Induction Heating Analysis Using Current Control
Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.
-
[L-OP-61] Smooth and robust optimization process in JMAG
The optimization is indispensable in machines design. Especially the optimization must consider not only the magnetic design issues but also the mechanical and the thermal design …
-
[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation
In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.
-
[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)
This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…
-
Verification of Temperature Distribution and Thermal Strain Level with Induction Heating for Thin Plates
Hidemasa Wakabayashi, Y-tec Corporation
