Temperature Distribution Analysis

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC296] Torque Characteristic Analysis of an IPM Motor Accounting for Temperature Distribution and Changes in Temperature

    In this example, magnetic field and thermal coupled analysis is run, and changes in torque due to part temperatures and magnet demagnetization are checked.

  2. [JAC297] Geometry Optimization of a Wound-field Synchronous Motor Including Efficiency Map, Part Temperature, and Stress Evaluations

    This case study runs a parametric optimization of a main automotive engine to maximize efficiency and torque while minimizing the temperature and stress as constraint conditions.

  3. [JAC294] Design Exploration of Wound-Field Synchronous Motors, Including Evaluating Part Temperature and Stress

    In this example, the efficiency map, part temperature, and stress, are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explo…

  4. [JAC010] Thermal Analysis of a Radiant Heater

    This Application Note explains how to carry out a thermal analysis using the thermal radiation phenomenon between a heater and a heated body to obtain the differences in temperatu…

  5. [JAC279] Thermal Analysis Accounting for Cooling of the IPM Motor

    In this example, thermal equivalent circuit is used to run thermal analysis of a 3-phase IPM motor that accounts for cooling, and check the temperature change in the coil.

  6. [JAC018] Thermal Analysis of a Motor

    In this example, how to evaluate a motor's temperature distribution by creating a thermal analysis model that can investigate the loss analysis and temperature distribution in ord…

  7. [JAC290] Design Exploration of IPM Motors, Including Evaluating Part Temperature and Stress

    In this example, the part temperature and stress are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explored.

  8. [JAC280] Topology Optimization of Induction Heating Coil

    In this example, magnetic field and thermal coupled analysis is run, and using topology optimization, searches are performed for a heating coil that maximizes the power factor and…

  9. [JAC233] Induction Heating Coil Optimization

    In this example, an example of using an optimization function to design a coil to use for induction hardening a gear is presented.

  10. [JAC228] Induction Motor Thermal Analysis

    In this example, evaluating induction motor temperature distribution.

  11. [JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)

    This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…

  12. [JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation

    In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.

  13. [JAC250] Dielectric Heating Analysis of a High-Frequency Preheater with Roller Electrodes

    In this example, a use case is presented where the influence of the pitch of roller electrodes on the temperature distribution of a material (tablets) is evaluated.

  14. [JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear

    In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.

  15. [JAC249] Dielectric Heating Analysis of a High-Frequency Preheater with Parallel Plate Electrodes

    In this example, a use case evaluating the influence on the temperature distribution of materials (tablets) with and without auxiliary electrodes is presented.

  16. [JAC206] Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis

    This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…

Search Filter

  • All Categories

Sign In
Create an account (Free) About authentication ID for JMAG website