Temperature Distribution Analysis

Sort condition
Newest first
Oldest first
Views
  1. 10 – Thermal Analysis of a Radiant Heater

    This Application Note explains how to carry out a thermal analysis using the thermal radiation phenomenon between a heater and a heated body to obtain the differences in temperatu…

  2. 45 – High-Frequency Induction Heating Analysis of an IH Cooking Heater

    This Application Note shows how to obtain the magnetic flux density surrounding an IH cooking heater that uses high frequency induction heating and the temperature distribution of…

  3. 13 – High-Frequency Induction Heating Analysis of a Shaft

    This Application Note explains how to create a numerical analysis model and analyze the elevated temperature process in order to use the coil geometry and current conditions (powe…

  4. 51 – High-Frequency Induction Heating Analysis of a Gear

    This Application Note shows how to create a numerical analysis model when obtaining the optimum coil geometry and current conditions (power supply frequency and current value), an…

  5. 85 – High-Frequency Induction Heating Analysis of a Constant Velocity Joint

    This Application Note shows how to run an analysis of the elevated temperature process by using the geometry of a coil to evaluate whether or not the target temperature conditions…

  6. 50 – High-Frequency Induction Heating Analysis of a Steel Wire (Translational Induction Hardening)

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…

  7. 49 – High-Frequency Induction Heating Analysis of a Steel Sheet

    This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and m…

  8. 47 – High-Frequency Induction Heating Analysis of a Crankshaft

    This Application Note shows an example of an evaluation performed by creating a numerical analysis model, analyzing the elevated temperature process, and seeing whether or not the…

  9. 48 – High-Frequency Induction Heating Analysis of a Printer Roller

    This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…

  10. 100 – Surface Heating Analysis of a Steel Plate

    This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …

  11. 44 – Resistance Heating Analysis of a Steel Sheet

    This Application Note presents how to obtain the calculate current density distribution, Joule loss distribution and temperature distribution of steel sheet.

  12. 123 – Thermal Analysis of a Choke Coil

    This Application Note shows the use of a thermal analysis to obtain the temperature distribution using the iron losses and copper losses in the choke coil as the heat source.

  13. 127 – Resistance Heating Analysis of Steel

    This Application Note presents how to obtain the temperature distribution, temperature variations, and heat flux distribution in a body heated by ohmic heating.

  14. 130 – Thermal Conductivity Analysis of Basic Geometry

    In this Application Note, the analysis accuracy is investigated by comparing the temperatures obtained through analysis in each part with theoretical values.

  15. 133 – Thermal Analysis of a Three-phase Transformer

    This Application Note presents an example of how to confirm a temperature distribution using the iron and copper losses of a three-phase transformer as heat sources.

  16. 146 – Analysis of Stray Loss in a Transformer

    This Application Note explains how to obtain losses in a transformer tank and use them to evaluate the temperature distribution in each part.

Search Filter

  • All Categories