DP

Transient Magnetic (2D/Axisymmetric)

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC229] Analysis of the Effect of PWM on the Iron Loss of an Induction Motor

    In this example, we introduce a case study to obtain the iron losses of the induction motor that accounts for the PWM input.

  2. [JAC207] Transfer Torque and Efficiency Analysis of Magnetic Gear

    In this example, the transfer torque and transfer efficiency are obtained with magnetic field analysis for the flux modulated type magnetic gear using permanent magnets for the in…

  3. [JAC194] Analysis of High-Speed Rotation Motors Accounting for Eddy Current

    Here we discuss the steps for accounting for eddy current loss occurring in the magnetic steel sheets during a magnetic field analysis, and then analyze the effects on torque.

  4. [JAC191] Torque Analysis of Three-Phase Induction Motors Accounting for the Skew Using the Multi-slice Method

    In this document, the multi-slice method is used to compare torque waveforms of a cage three-phase induction motor with and without skew, and is then used to verify the effects of…

  5. [JAC189] Response Characteristics Analysis of Injectors Accounting for Collision

    For this case, direct current voltage is applied to the solenoid type injector and the response characteristics is obtained after accounting for the effect of the collision and ed…

  6. [JAC188] Thermal Demagnetization Analysis of IPM Motors Accounting for Coercive Force Distribution of Magnets

    This example presents whether or not the demagnetization region can be smaller by assigning distribution to the coercive force of permanent magnets.

  7. [JAC180] Analysis of SR Motor Dynamic Characteristics

    This example presents how to carry out an analysis with different switch timings to evaluate torque and current in SR motors.

  8. [JAC179] Analysis of SR Motor Static Characteristics

    This example presents an evaluation for each rotor position of the effect on flux linkage (shown as I-Psi characteristics below) when excitation current is changed.

  9. [JAC178] Analysis of SR Motor I-Psi Characteristics

    This example presents an evaluation of flux linkage, inductance and torque for each rotor position when the flowing current value is changed.

  10. [JAC177] Torque Characteristic Analysis of a Three Phase Induction Motor

    This Application Note explains how to obtain the torque characteristics in an induction motor when the current amplitude has been changed in a specific slip.

  11. [JAC173] Basic Characteristic Analysis of an IPM Motor

    This Application Note demonstrates an analysis in which an IPM motor's cogging torque, torque, magnetic flux density distribution, and iron loss in the stator core are obtained.

  12. [JAC163] Torque-Current Curve Analysis of an SPM Motor

    This Application Note presents how to obtain the torque-current curve as a basic property of one type of permanent magnet synchronous motor, the surface permanent magnet synchrono…

  13. [JAC176] Drive Characteristic Analysis of a Three-Phase Induction Motor

    This Application Note explains how to confirm drive characteristics such as torque, loss, and efficiency in an induction motor when its rotation speed changes.

  14. [JAC154] Calculation of Equivalent Circuit Parameters in a Three-Phase Induction Motor

    This Application Note explains how to obtain the secondary resistance, leakage inductance, and excitation inductance of an induction motor when its power supply frequency has been…

  15. [JAC161] Line Start Analysis of a Three-phase Induction Machine

    This Application Note presents an analysis that simulates the line start of an induction motor and obtains the starting performance of its rotation speed variations.

  16. [JAC159] Sensitivity Analysis of Dimensional Tolerance in an SPM Motor

    This Application Note presents how to assume a dimensional tolerance of ±0.4 mm for a chamfer, and find out whether changing dimensions within the tolerance range has an effect on…

Search Filter

  • All Categories

Remember me
Sign In
Create an account (Free) About authentication ID for JMAG website