Search results：Iron Loss
- Sort condition
- Newest first
- Oldest first
-
[JAC205] Analyzing the Torque Characteristics of IPM Motors Using a Thermal Equivalent Circuit
Here, we confirm a situation where temperature increases due to eddy current of the iron loss and magnet, which causes demagnetization of the magnet and torque reduction.
-
[JAC278] Creating Six-Phase Induction Motor Efficiency Maps
In this example, a six-phase induction motor efficiency map is created in the concept design stage, and each operating point slip and iron loss are evaluated.
-
[JAC142] Press Fit Analysis of a Divided Core
This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…
-
[JAC173] Basic Characteristic Analysis of an IPM Motor
This Application Note demonstrates an analysis in which an IPM motor's cogging torque, torque, magnetic flux density distribution, and iron loss in the stator core are obtained.
-
[JAC123] Thermal Analysis of a Choke Coil
This Application Note shows the use of a thermal analysis to obtain the temperature distribution using the iron losses and copper losses in the choke coil as the heat source.
-
[JAC289] Efficiency Map Creation for Wound-Field Synchronous Motors
In this example, efficiency maps for a wound-field synchronous motor are created to check the combinations of currents that result in maximum efficiency. In addition, the loss bre…
-
[JAC034] Demagnetization Analysis of an SPM Motor
This note presents the use of a magnetic field analysis to evaluate the demagnetizing ratio distribution of an of an SPM motor by changing the current flow.
-
[JAC203] No-Load Test Analysis of Power Transformer
This example focuses on modeling in the analysis of no-load tests in JMAG and obtains the magnetic flux line, current, excitation conductance, and excitation susceptance that can …
-
[JAC018] Thermal Analysis of a Motor
In this example, how to evaluate a motor's temperature distribution by creating a thermal analysis model that can investigate the loss analysis and temperature distribution in ord…
-
[JAC287] Analysis of Current Conditions for the Maximum Efficiency of a WFSM
In this example, we determine the motor efficiency in relation to the field current for a WFSM when the motor output is kept constant.
-
[JAC269] Creating Three-Phase Induction Motor Efficiency Maps Accounting for Harmonics
In this example, efficiency maps are created for a three-phase induction motor accounting for PWM carrier and slot harmonics. These are compared with efficiency maps when harmonic…
-
[JAC165] Creating IPM Motor Efficiency Maps
In this example, an efficiency map of an IPM motor is created and the loss ratios at each operating point are evaluated.
-
[JAC228] Induction Motor Thermal Analysis
In this example, evaluating induction motor temperature distribution.
-
[JAC264] Creating 6-Phase IPM Motor Efficiency Maps
In this example, the efficiency map of a 6-phase IPM motor is created with loss ratios at each operating point also evaluated.
-
[JAC265] Creating Synchronous Reluctance Motor Efficiency Maps
In this example, the efficiency map of a synchronous reluctance motor is created with loss ratios at each operating point also evaluated.
-
[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor
In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.
